banner

Announcement

Collapse
No announcement yet.

AC30CC2 2x16ohm parallel wiring

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by ehdwuld View Post
    Did you read my post?

    Tape up the twp extra wires individually
    not to each other
    Not to each other

    Tuck them up somewhere they can't be seen
    Dont cut them out you may want to do something else later

    Or
    Just take it to a local tech let them swap it out
    yeah i did. that's why i adjusted the schematic to be sure if i understood it right. so my adjusted schematic should work without any problems ? without volume/toneloss etc..

    i'm new with this so maybe that's why i ask a lot to be sure. And i'm dutch so i have to read everything twice

    Comment


    • #17
      It does look correct

      As far as tone and volume I am not sure
      An 8 ohm V30 sounds slightly different than the 16 ohm version

      And different speaker manufacturer will change the tone some what

      Be sure to tape over the connectors on the spare wire as you can reverse this back to original if you don't like it
      Don't tape them together

      You may have to use one positive from one pair and the negative of the other pair, from what the diagram says
      s
      Do you have a meter?
      You can check the positive from A and the negative from B to check for continuity
      Once you find that one that is directly conned to the other.
      That will be the series connection
      That's the short wire in the center of your diagram
      With the dotted lines around it

      Tape both ends of that one up use the outside ones for positive and negative main connection
      Then using any speaker wire connect the other speaker as we discussed
      Last edited by ehdwuld; 08-25-2021, 02:31 PM.
      EHD
      Just here surfing Guitar Pron
      RG2EX1 w/ SD hot-rodded pickups / RG4EXFM1 w/ Carvin S22j/b + FVN middle
      SR500 / Martin 000CE-1/Epiphone Hummingbird
      Epiphone Florentine with OEM Probuckers
      Ehdwuld branded Blue semi hollow custom with JB/Jazz
      Reptile Green Gibson Custom Studio / Aqua Dean Shire semi hollow with piezo
      Carvin Belair / Laney GC80A Acoustic Amp (a gift from Guitar Player Mag)
      GNX3000 (yea I'm a modeler)

      Comment


      • #18
        Originally posted by ehdwuld View Post
        It does look correct

        As far as tone and volume I am not sure
        An 8 ohm V30 sounds slightly different than the 16 ohm version

        And different speaker manufacturer will change the tone some what

        Be sure to tape over the connectors on the spare wire as you can reverse this back to original if you don't like it
        Don't tape them together

        You may have to use one positive from one pair and the negative of the other pair, from what the diagram says
        s
        Do you have a meter?
        You can check the positive from A and the negative from B to check for continuity
        Once you find that one that is directly conned to the other.
        That will be the series connection
        That's the short wire in the center of your diagram
        With the dotted lines around it

        Tape both ends of that one up use the outside ones for positive and negative main connection
        Then using any speaker wire connect the other speaker as we discussed
        Yeah i already taped the inner 2 wires(jumper wire) with a shrink sleeve to be safe there not making contact anywhere. The outer 2 wires (+ & -) are used for the new connection.

        tnx for the help
        Last edited by dudiluty; 08-25-2021, 10:16 PM.

        Comment


        • #19
          How does it sound?
          do you like ir?
          Give us a review of the amp with your new speakers please
          EHD
          Just here surfing Guitar Pron
          RG2EX1 w/ SD hot-rodded pickups / RG4EXFM1 w/ Carvin S22j/b + FVN middle
          SR500 / Martin 000CE-1/Epiphone Hummingbird
          Epiphone Florentine with OEM Probuckers
          Ehdwuld branded Blue semi hollow custom with JB/Jazz
          Reptile Green Gibson Custom Studio / Aqua Dean Shire semi hollow with piezo
          Carvin Belair / Laney GC80A Acoustic Amp (a gift from Guitar Player Mag)
          GNX3000 (yea I'm a modeler)

          Comment


          • #20
            Originally posted by ehdwuld View Post
            How does it sound?
            do you like ir?
            Give us a review of the amp with your new speakers please
            I will this weekend. I’m in de studio’s this weekend with my band and the vox. Then i can write a better review.

            Comment

            Working...
            X