I've finished wiring this thing up, the switching works, the 9v > 17v > 15v power supply circuit works and the voltage is being read all over the circuit.
The problem is that I'm getting a sound when the flanger is on, but it's just the normal guitar sound - ie no flange.
I've tried troubleshooting it and found this discrepancy in schematics. The one with the 68k resistor is the one I used, but the one with the 62k resistor is the original MXR factory schematic. This is the only circuit difference between the two schematics (the other differences are just slightly different values used). Could wiring the flanger up like the schem with the 68k resistor stop it working? Is that my problem?
[img]https://forum.seymourduncan.com/attachment.php?attachmentid=4011&stc=1&d=114354461 5
[/img]
The problem is that I'm getting a sound when the flanger is on, but it's just the normal guitar sound - ie no flange.
I've tried troubleshooting it and found this discrepancy in schematics. The one with the 68k resistor is the one I used, but the one with the 62k resistor is the original MXR factory schematic. This is the only circuit difference between the two schematics (the other differences are just slightly different values used). Could wiring the flanger up like the schem with the 68k resistor stop it working? Is that my problem?
[img]https://forum.seymourduncan.com/attachment.php?attachmentid=4011&stc=1&d=114354461 5
[/img]