Can anyone recommend a...

[B2D]

Re: Can anyone recommend a...

emailed neutrik and whirlwind about buying parts.

[Robert S.]

Re: Can anyone recommend a...

Gimmee a minute, I'll find some plugs.

I do just what the Mosseman said, hardwire the 1/4" male plugs to sheilded wire and then hardwire those to the jacks.

Be right back.....

[Robert S.]

Re: Can anyone recommend a...

http://www.musiciansfriend.com/product/General/Accessories/Cases?sku=421646

That is what I used for the face plate, very easy to drill out. The single space is $4.99 .

I can't find the Neutrix jacks, but Switchcraft 1/4" jacks will do just fine. Be sure to use some shrink tube at the terminal connections to keep things strong and insulated.

[B2D]

Re: Can anyone recommend a...

Gimmee a minute, I'll find some plugs.

I do just what the Mosseman said, hardwire the 1/4" male plugs to sheilded wire and then hardwire those to the jacks.

Be right back.....

[B2D]

Re: Can anyone recommend a...

http://www.musiciansfriend.com/produ...ses?sku=421646

That is what I used for the face plate, very easy to drill out. The single space is $4.99 .

Will normal drill bits work or do i need special ones?

Sorry for all the dumb q's. Building rack stuff is totally new to me.

[Robert S.]

Re: Can anyone recommend a...

http://www.musiciansfriend.com/product/General/Accessories/Cables?sku=335002

$4.99 for the plate and $1.99 x 8 = $21.00 give or take.


Any regular drill bit will work. Just pop the plate with a center punch so your bit isn't as likely to wander when you start the hole.

It's way too easy.

The jacks I used were the plastic, made for PC type that you see in Marshall amps and Boogie speaker cabs. I'll ask my tech where he gets them but really, the Switchcraft jacks will work just fine.