banner

Announcement

Collapse
No announcement yet.

tuning keys

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • tuning keys

    ok so I'm kind of upgrading my epi les paul, just ordered a jazz/jb and such. no i'm looking at replacing the tuning keys (my $150 acoustic holds a pitch much better). I've heard grovers are good. I guess what I'm asking is, can I just order them online ( http://www.musiciansfriend.com/srs7/...se_pid/361000/) and expect to install them myself, or is this something a tech should do.

    Also, are there any other upgrades I should be thinking about? right now the pups and tuners are the only things on my agenda....

  • #2
    Re: tuning keys

    If you go with Grover tuners then be sure to get the 18:1 ratio. They keep you tuned great. I'd recommend upgrading you pots and toggle switch to Gibson parts. They are higher quality and more reliable. I would also recommend some Schaller strap locks and if you really want to improve the sustain have a luthier install a bone nut (if you're not experienced in changing nuts I don't recommend experimenting with you own guitar).
    ~Sid

    "If you play a Nickelback song backwards you'll hear messages from the devil. Even worse, if you play it forward you'll hear Nickelback." ~David Grohl

    Comment


    • #3
      Re: tuning keys

      When changing tuners You should check the diameter of your peg holes.
      Not all are direct replacements. Some aftermarket tuners may require
      a larger peg hole ? If your not comfortable with wideing the holes take
      it to a tech.
      http://www.soundclick.com/whirlwindbluesrevue

      Comment


      • #4
        Re: tuning keys

        I like the Grover and Schaller locking tuners best. You should be able to find something that's a direct replacement for a Les Paul, but if not, be prepared to drill new holes for the screws on the back of the headstock. Most tuners use a 10 mm sized hole, so if your guitar has a smaller hole, it'll need to be reamed to the slightly larger 10 mm size. If you're not very handy with tools, this is most definitely a job for a tech. If you can find tuners that are a direct replacement, you can just take the old ones off and put the new ones on.

        Ryan
        Originally posted by JOLLY
        I'm the reason we had to sign waivers

        Comment

        Working...
        X