Tinkering with Bias?

[teledude Junior Member Find all posts View Profile Close teledude]

Hello:

Has anyone experimented with changing the bias setting to "hotter" or "colder" than normal? I have a Fender Twin...it lets you set the bias yourself with a voltmeter(suggests 60mvDC). I have heard that changing the bias can dirty-up or clean-up the sound of the amp. I have also heard that changing the bias can destroy the tubes/input power-supply Has anyone tried this???

I have read some very useful info on this site...thank you all for sharing.

teledude

[Gearjoneser Gear Ho Find all posts View Profile Close Gearjoneser]

Re: Tinkering with Bias?

I like to have the chassis on a bench, plugged into a cab and with a guitar plugged into it. Just strum the guitar with one hand, while the other hand nudges the bias pot, somewhere in the middle of it's travel. If you know how your amp sounds when it's at it's best, you'll hear where the bias pot should be set. When the amp is boldest, punchiest, and tightest is when it's biased correctly. Either direction away from that, and the amp sounds feeble or too pushed, and it's loses it's punch. It's best to do it with a bias tool and multimeter, or even better...an oscilloscope, but if you do it by ear, just be careful not to turn the gray plates red. Just find the nicest tone you can, then leave it.

[texasguitarslinger Mo Cow Bellologist Find all posts View Profile Close texasguitarslinger]

Re: Tinkering with Bias?

I like to have the chassis on a bench, plugged into a cab and with a guitar plugged into it. Just strum the guitar with one hand, while the other hand nudges the bias pot

GJ, I understand that you have plenty of experience working with and modding your equipment but with all of the youngsters on this board it's kind of reckless to suggest that you have one hand in the amp and the other on the strings of your guitar with the power on. These kids don't understand basic electricity and circuits and that scenario could easily turn lethal.

WARNING: It is not a good idea to touch your guitar strings when you have your other hand inside the amp or near a live amp circuit board. There are LETHAL high voltages on the board and you could inadverdantly complete a circuit to ground through your body and across your chest. This can KILL you. Please do not attempt this without supervision or unless you are extremely experienced with high voltage circuits.

[mrid The Duke Of Trades Find all posts View Profile Close mrid]

Re: Tinkering with Bias?

A non-conductive tool would be best in this case, since you could accidentally slip out of the bias trimmer when you look away and shock yourself.

http://www.prokits.com.tw/english/on...driver/p66.htm

I really need something like this...

[Gearjoneser Gear Ho Find all posts View Profile Close Gearjoneser]

Re: Tinkering with Bias?

You're probably right, Texas. I guess I was answering the question from someone who feels comfortable doing it, but I wouldn't suggest having a running amp exposed on a bench, if you've got limited knowledge of it. Even an amp that's not plugged in can shock the living @#$% outta you. Keep your hands AWAY from those big filter capacitors....the big blue or gray things that look like plastic tubes. Those have lethal voltages stored in them. FYI Again, if you don't know what you're doing, pay someone $35 to bias it for you. If they charge much more than that, call someone else.

[texasguitarslinger Mo Cow Bellologist Find all posts View Profile Close texasguitarslinger]

Re: Tinkering with Bias?

You're probably right, Texas. I guess I was answering the question from someone who feels comfortable doing it, but I wouldn't suggest having a running amp exposed on a bench, if you've got limited knowledge of it. Even an amp that's not plugged in can shock the living @#$% outta you. Keep your hands AWAY from those big filter capacitors....the big blue or gray things that look like plastic tubes. Those have lethal voltages stored in them. FYI Again, if you don't know what you're doing, pay someone $35 to bias it for you. If they charge much more than that, call someone else.

NP, Gearjoneser. Just trying to look out for the kids.