Tweet
I know this is a bit tricky but i would be glad if anyone could help. I am using with my marshall jcm2000 tsl601 combo a rocktron replifex rack unit. The replifex has a chanel switching ability which uses a 1/4" cable that runs from the rear panel of the replifex to the footswitch jack on the amp. When changing presets on the replifex with my midi controller it changes channel on the amp based on which channel on the amp i have assigned that particular preset. Now the footswitch on the tsl601 (and the relative jack)is a strange one with 6 pins......and offers chanel switching between chanel 1,2,3 reverb on/off and fx loop on off. What i would like to do is let the replifex operate the channel switching(using a 1/4 cable) between channels 1(clean) and 3 (lead) while leaving the rest to the footswitch that comes stock with the marshall. How can i achieve this?
Talk with your fellow tone freaks on the web's liveliest (and friendliest!) tone forum. All are welcome, from seasoned pros to absolute beginners.
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Tech experts from Seymour Duncan are regularly on this forum, and are clearly labeled as employees of Seymour Duncan. They are here to help.