banner

Announcement

Collapse
No announcement yet.

Ibanez 2le2-a anchor installation?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ibanez 2le2-a anchor installation?

    What should the hole size be for an Ibanez 2le2-a anchor? I have to install them on my guitar body but the holes seem to small. I donít want to hammer them in and crack the wood. They donít just push in either. They are bigger than the holes.

  • #2
    Re: Ibanez 2le2-a anchor installation?

    You are leaving out a lot of information. We need specific dimensions and pictures. Thanks.
    aka Chris Pile, formerly of Six String Fever

    Comment


    • #3
      Re: Ibanez 2le2-a anchor installation?

      You can throw ANY size anchor into the ocean...it IS big enough.
      Originally Posted by IanBallard
      Rule of thumb... the more pot you have, the better your tone.

      Comment


      • #4
        Re: Ibanez 2le2-a anchor installation?

        Yes, you ARE leaving out a lot of necessary info.
        Originally Posted by IanBallard
        Rule of thumb... the more pot you have, the better your tone.

        Comment


        • #5
          Re: Ibanez 2le2-a anchor installation?

          Have you measured the diameter or do you know what the diameter of the anchor is? And what is the diameter of the hole?
          The hole SHOULD be a bit smaller. you shouldn't be able to just push them into the wood.

          If we knew those dimensions we could let you know if they are correct or if you need to drill out the holes a bit.
          Originally Posted by IanBallard
          Rule of thumb... the more pot you have, the better your tone.

          Comment

          Working...
          X