Re: Tone Gurus Please Advise! Buzz issue. All info/pictures/diagram included.
I will experiment with this soon and report back. Bit of a hassle lugging the gear around but work the trouble if I find an answer.
By this do you mean unsolder the hot and ground wires coming from the output jack to the volume (removing them from the volume pot, leaving them on the output jack), and unsolder the signal wire for one pickup from the switch and the pickup ground wire from the volume pot case, then attach the pickup signal wire (black) directly to the hot output jack wire, and the pickup ground (green, and shield wire) directly to the output jack ground wire), by passing the volume pot, tone, pot, and switch all together? What about the bridge ground wire? Would that need to be grounded also so the strings are grounded? Sorry i've never heard of this test method before.
Originally posted by bhr
View Post
Originally posted by bhr
View Post
Comment