Inlay question for the luthiers/techs.

[Gtrjunior]

I have an Ibanez guitar the has very difficult to see side markers on a dark stage.
I poked around on them and noticed that I could easily push them below the surface of the neck. I removed the inlay plastic with a small hand drill and now I’m ready to glue them new side markers in.
I decided to replace them with luminlay material and I’m wondering if there is a specific glue I should be using to glue them in?
Or is a standard wood glue sufficient?

[ICTGoober]

Re: Inlay question for the luthiers/techs.

Titebond will work fine.

[Gtrjunior]

Re: Inlay question for the luthiers/techs.

Titebond will work fine.

Thank you, sir.

[GuitarDoc]

Re: Inlay question for the luthiers/techs.

I always use superglue gel. But anything will work.

[Gtrjunior]

Re: Inlay question for the luthiers/techs.

I ordered a small hand drill and removed all of the old plastic inlay material.
Next I’ll glue in the Luminlay and give it a little time to dry. After that, the sanding process

Any tips/secrets to successfully accomplishing that is also much appreciated!!

[GuitarDoc]

Re: Inlay question for the luthiers/techs.

I ordered a small hand drill and removed all of the old plastic inlay material.
Next I’ll glue in the Luminlay and give it a little time to dry. After that, the sanding process

Any tips/secrets to successfully accomplishing that is also much appreciated!!

StewMac has a lot of helpful videos, some of them covering this exact topic.

[Gtrjunior]

Re: Inlay question for the luthiers/techs.

StewMac has a lot of helpful videos, some of them covering this exact topic.

Cool! I’ll check them out. Thanks!