Lets see those pedal boards you are using right now.

[ThisDyingSoul76]

Re: Lets see those pedal boards you are using right now.

Running both amps clean at the moment. Signal goes from guitar to Radial ABY, A to group one of the switcher (SP Comp, Klone, Euphoria); B to group two (Bluesbreaker clone, Lovepedal Jubilee, Hermida EPH-3 echoplex simulator). The TC Electronics Dreamscape is wired in stereo with on set of input/output going to A, the second to B. From Group 1 the signal goes to a Marshall DSL40C and Group 2 goes to my Wangs OD-30.

[dystrust]

Re: Lets see those pedal boards you are using right now.

It turns out I was wrong about being done with my board, shocking I know.

My bro and I were playing through it a few weeks ago and he commented that he almost couldn't tell that the DD-2 was on. After trying a few other settings I came to agree and removed the DD-2 since it's in better condition than my long-chip DD-3. I've also been wanting some additional modulation options for my 'dirty' loop, so this new vacancy was perfect for an MXR Micro Flanger. I have the DD-3 set for a sort of EVH Echoplex sound, and it's just lo-fi enough to pull it off.

Pedal board V3:


The board is a Holeyboard Evolution Wide; power courtesy of a Voodoo Lab Pedal Power Mondo.
Signal flow is set up to mimic a two-amp rig I had briefly in the mid 2000s.

Guitar -> vibe -> wah -> switcher (clean / dirty / tuner loops)
Clean: MIJ CS-3 -> GT-500 -> CE-2 -> FRV-1 -> TR-2
Dirty: Tumnus -> UFO (fuzz / octave) -> Micro Flanger -> MIJ DD-3 (~400ms)
Tuner: Korg Pitchblack

Original NPBD here, while V2 is here.

[Van Noord]

Re: Lets see those pedal boards you are using right now.

Carvin V3 steals the show...

[allstarrme]

Re: Lets see those pedal boards you are using right now.



This running into



I have the wireless and nova drive in front of the amp, with the nova system in the loop and the sonic maximizer at the end of the return. I built a cable snake between them and the signal cables are all balanced including the bbe. The carvin has a balanced send and return as well so very low noise. The nova system handles midi for amp channels and the nova drive.

This will soon just be my practice amp once I get the G system set up all programmed.

[Gtrjunior]

Re: Lets see those pedal boards you are using right now.

. . .

[ATTACH=CONFIG]92415[/ATTACH]

Nice pedalboard [emoji52]