Can someone explain this to me? (A/B/Y EHX Switchblade Questions)

[HALENisking Ultimate Tone Member Find all posts View Profile Close HALENisking]

Part A

I was reading a review of the EHX Switchblade+ and stumbled across this:
"It also features a tuner out that can be used in the standard fashion, or as a separate effects send to another pedal or pedals."
Could someone explain to me how this would function and play out in a scenario? Simple simple explanation please-- assume I'm a four year old. Might as well be...

Part B

I'm picking up this pedal used as part of a trade tomorrow, and I'm honestly just brainstorming some uses for it. It can obviously A/B between amps... Could it be used as a true bypass looper? I have a flanger that I wouldn't mind being able to true bypass.
Idk, any ideas/suggestions are very welcome!

[jeremy LoveMachineologist Find all posts View Profile Close jeremy]

Re: Can someone explain this to me? (A/B/Y EHX Switchblade Questions)

as far as i know its just a passive a/b switch. three jacks Y, A, B. Y is always active, the footswitch selects between A or B. you could use it to switch between guitars or amps or two effects chains.

[HALENisking Ultimate Tone Member Find all posts View Profile Close HALENisking]

Re: Can someone explain this to me? (A/B/Y EHX Switchblade Questions)

as far as i know its just a passive a/b switch. three jacks Y, A, B. Y is always active, the footswitch selects between A or B. you could use it to switch between guitars or amps or two effects chains.

I appreciate the response, I do realize it's a bit of a mundane question... just trying to comprehend all options.
The review I quoted is still a bit unclear to me though. If you were to use the tuner out as a send, wouldn't you need a return?

[jeremy LoveMachineologist Find all posts View Profile Close jeremy]

Re: Can someone explain this to me? (A/B/Y EHX Switchblade Questions)

ah, ok. im only familiar with the switchblade nano, not the plus. i just took a look at the + and its different.

it is an aby switch. one input, the tuner out is always active. the A and B outs are selectable by the footswitch A or B or A+B. im not sure how you would use it as a true bypass loop since there is no return.

[DrNewcenstein He Did the Monster Mash Find all posts View Profile Close DrNewcenstein]

Re: Can someone explain this to me? (A/B/Y EHX Switchblade Questions)

I'm thinking it's a single-ended output, like a direct out.

[treyhaislip Mojo's Minions Find all posts View Profile Close treyhaislip]

Re: Can someone explain this to me? (A/B/Y EHX Switchblade Questions)

Does anyone know if you can go both directions? Like say you wanted take guitar into Y out to Amp A and Amp B OR Guitar 1 into A and Guitar 2 into B all out into Amp Y?

[PFDarkside of the Forum Find all posts View Profile Close PFDarkside]

Re: Can someone explain this to me? (A/B/Y EHX Switchblade Questions)

http://www.ehx.com/products/switchbl...s/instructions

Looks like it is all passive, power is only for LED status.

Beware impedance loading with this design, in "Y" mode, one input is connected to all three outputs in parallel. Even in A/B mode you have a situation like the passive Ernie Ball Volume Pedal. (If you are driving the switchblade, everything should be OK, if it's first after guitar or after on TB pedals, you may notice high end roll off.)

[jeremy LoveMachineologist Find all posts View Profile Close jeremy]

Re: Can someone explain this to me? (A/B/Y EHX Switchblade Questions)

Does anyone know if you can go both directions? Like say you wanted take guitar into Y out to Amp A and Amp B OR Guitar 1 into A and Guitar 2 into B all out into Amp Y?

i know that works fine on the switchblade nano

[treyhaislip Mojo's Minions Find all posts View Profile Close treyhaislip]

Re: Can someone explain this to me? (A/B/Y EHX Switchblade Questions)

i know that works fine on the switchblade nano

Thanks! I need a pedal that will do that.

[HALENisking Ultimate Tone Member Find all posts View Profile Close HALENisking]

Re: Can someone explain this to me? (A/B/Y EHX Switchblade Questions)

I'm thinking it's a single-ended output, like a direct out.

Ok, thank you!
I guess I really just need the try stuff out when I pick it up

[HALENisking Ultimate Tone Member Find all posts View Profile Close HALENisking]

Re: Can someone explain this to me? (A/B/Y EHX Switchblade Questions)

http://www.ehx.com/products/switchbl...s/instructions

Looks like it is all passive, power is only for LED status.

Beware impedance loading with this design, in "Y" mode, one input is connected to all three outputs in parallel. Even in A/B mode you have a situation like the passive Ernie Ball Volume Pedal. (If you are driving the switchblade, everything should be OK, if it's first after guitar or after on TB pedals, you may notice high end roll off.)

So basically you're saying to avoid this you need a buffer in front it?

[PFDarkside of the Forum Find all posts View Profile Close PFDarkside]

Re: Can someone explain this to me? (A/B/Y EHX Switchblade Questions)

So basically you're saying to avoid this you need a buffer in front it?

It'll be up to you and your tonal preference. It may be unnoticeable or acceptable, or it might bother you. Just posting idly so you are aware if something seems different or "off".

Also, to clarify, you'd be sending the Tuner on a "dead end", there's no return path.

[HALENisking Ultimate Tone Member Find all posts View Profile Close HALENisking]

Re: Can someone explain this to me? (A/B/Y EHX Switchblade Questions)

It'll be up to you and your tonal preference. It may be unnoticeable or acceptable, or it might bother you. Just posting idly so you are aware if something seems different or "off".

Also, to clarify, you'd be sending the Tuner on a "dead end", there's no return path.

Rad. I appreciate the input, as always.

[Darg1911 Mojo's Minions Find all posts View Profile Close Darg1911]

Re: Can someone explain this to me? (A/B/Y EHX Switchblade Questions)

If it's in the budget, consider and "active" ABY ... assuming you are just looking to split the outputs, and don't need to be able to select two inputs. Radial has the Twin City which is real popular. I use a Fulltone True-Path. They are both about $160 though. There are others as well.