banner

Announcement

Collapse
No announcement yet.

HELP! My MightyMite Motherbucker sounds like crap!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Jeff_H
    replied
    Re: HELP! My MightyMite Motherbucker sounds like crap!

    Ok...that makes sense.

    Leave a comment:


  • mrid
    replied
    Re: HELP! My MightyMite Motherbucker sounds like crap!

    Originally posted by Jeff_H
    Whadid ya do to make it work?
    I wired it like the "vintage" MightyMite humbuckers.

    Leave a comment:


  • Jeff_H
    replied
    Re: HELP! My MightyMite Motherbucker sounds like crap!

    Whadid ya do to make it work?

    Leave a comment:


  • mrid
    replied
    Re: HELP! My MightyMite Motherbucker sounds like crap!

    Nevermind, I fixed it...

    Leave a comment:


  • mrid
    replied
    Re: HELP! My MightyMite Motherbucker sounds like crap!

    I know guys, I've already suffered enough, so I don't need any more noogies! The is a regular double coil humbucker. I wasn't expecting Seymour Duncan magic with this pup (it was just a temporary!), but this is down right unusuable.

    To make matters more complicated, when I ground the red and white wires connecting the coils, thus splitting it, it sounds BETTER and LESS trebly.

    Leave a comment:


  • mongrollo
    replied
    Re: HELP! My MightyMite Motherbucker sounds like crap!

    Originally posted by mrid


    Anyways, I'm trying this MightyMite 22k beast in my Les Paul, and for some reason it sounds incredibly bad...worse than I expected (very tinny). Metering the output shows the proper 22k, so it's not a split issue, and the pups don't sound thin in the middle position...so it's not a phase issue...did I just get a dud?
    Does it comes with a 4 conductor wiring? Could it be posible that you wired it in series but in phase?

    Just clarify things a bit. A traditional humbucker it is made of two single coils that are oposite in phase (diferent winding direction) and in magnetic field (diferent polarity). When you have a 4 conductor wiring and you want to wire the pickup in series you have two chances: wire them in phase or out of phase. Out of phase it is the normal humbuker wiring (as I said before) and the expected tone should be high output/powerfull. In phase the tone it is thin and weak.

    Sooooooooooo, Could it be posible that you wired the 4-condctor pickup in the wrong way?

    In case you did you have to reverse the conductors of one of the single coil of the humbucker. In case you didn't... I have wasted a very precious time of my life!!!

    Leave a comment:


  • Kent S.
    replied
    Re: HELP! My MightyMite Motherbucker sounds like crap!

    Originally posted by nuntius
    DCR means nothing for output really, reminds me of the DMZ Multibucker, now that pup sounds pretty cool (a Fast Track 1 and a Chopper in the same cover), same concept ... ie. two humbucking side by side rail pups.

    Leave a comment:


  • nuntius
    replied
    Re: HELP! My MightyMite Motherbucker sounds like crap!

    the real motherbucker

    27.5k



    but really... i wouldnt have either.

    wait a minute -

    Originally posted by mrid
    it sounds incredibly bad...worse than I expected
    you expected it to be bad? why did you get it then

    Leave a comment:


  • Zerberus
    replied
    Re: HELP! My MightyMite Motherbucker sounds like crap!

    Originally posted by TattooedCarrot
    I didn't know people actually bought those

    Yeah, YouŽd think that the Tradeologist would know better

    Leave a comment:


  • TattooedCarrot
    replied
    Re: HELP! My MightyMite Motherbucker sounds like crap!

    Originally posted by mrid
    HELP! My MightyMite Motherbucker sounds like crap!
    I didn't know people actually bought those

    Leave a comment:


  • Kent S.
    replied
    Re: HELP! My MightyMite Motherbucker sounds like crap!

    Is that the triple coil pup? If so, how did they get three coils to hum-buck, unless two of the same magnetic polarities are half output? I was always intrigued by that design, and thought is usefull for say switch between two coils nearest bridge, and then two coil furthest from bridge. Definitely some tonal options, never tried that one, the one that Alvarez had on some of thier Dana Scoops were pretty descent sounding though, I don't think all three coils were on at the same time though. Details man, details ...

    Leave a comment:


  • rspst14
    replied
    Re: HELP! My MightyMite Motherbucker sounds like crap!

    to fix a stripped screw hole: fill the hole with strong super glue, then redrill the hole. Done it many a times.

    Ryan

    Leave a comment:


  • Jeff_H
    replied
    Re: HELP! My MightyMite Motherbucker sounds like crap!

    Put that motherbucker in the microwave until the microwave gives out. Then immerse it in hot boiling water for at least 4 hours. Then throw the damn thing away...it will sound fantastic hitting the bottom of the trash can. Nice low end thump.

    Leave a comment:


  • mrid
    replied
    Re: HELP! My MightyMite Motherbucker sounds like crap!

    Originally posted by \m/(00)\m/
    see what happens when you stray from the duncan line
    I'm fresh out of new Duncans, though! I was going to put a JB in the bridge, but the damned screw hole is stripped!

    Leave a comment:


  • \m/(00)\m/
    replied
    Re: HELP! My MightyMite Motherbucker sounds like crap!

    see what happens when you stray from the duncan line

    Leave a comment:

Working...
X