banner

Announcement

Collapse
No announcement yet.

P90 Stack wiring suggestions needed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tele-Bob
    replied
    Re: P90 Stack wiring suggestions needed

    Thanks for the suggestion. I'll look into that. I really want to avoid having two volume controls.

    Leave a comment:


  • Pedro Vecino
    replied
    Re: P90 Stack wiring suggestions needed

    I would use 680K resistors paralelled with the Kinmans. In the
    fifth position (neck) in combination with a
    500K volume potentiometer would be 288K and in position four (neck+center), 202K. A good compromise.
    Last edited by Pedro Vecino; 03-28-2004, 08:01 AM.

    Leave a comment:


  • Tele-Bob
    started a topic P90 Stack wiring suggestions needed

    P90 Stack wiring suggestions needed

    This is a little different.

    I am putting a P90 Stack in the bridge spot of my Strat and 2 Kinmans in the neck and middle positions. I have found the Kinmans to work best with a 250K pot and the P90 Stack with a 500K pot.

    How can I wire this up so that I have only one volume control?

    Is there such a thing as a stacked 250K/500K pot?

    Any help would be greatly appreciated.
Working...
X