changing IbanezRG470 V8 bridge PUP

[sevenfacedsin]

im having trouble changing my rg470's stock bridge pickup to a SD SH8 invader.
ive tried the SD website schematic and it doesnt work.
4 wires come out of the invader, a red one, white one, black, green and bare.
anybody have a diagram for a standard ibanez with 2 HUM, 1 single, 1 vol, 1 tone?
or does anyone know how to put the invader on, without knocking out the other two pickups?

_____________________
2002 ibanez rg470
rg550 wizard 2 neck
lo-trsII tremolo
neck - V7
mid - V6
bridge - seymour duncan sh8 invader
planet waves trim-lock tuners
digitech genesis 1
_____________________
2001 ibanez rg170
wizard neck - now fretless.
5 string custom.
piezo bass pickup

[Benjy_26]

Re: changing IbanezRG470 V8 bridge PUP

For standard series humbucking operation, attach the black wire from the invader to the switch, green and bare to the back of the vvolume pot, and solder the red and white wires together and tape them off. If in this configuration the Invader is out of phase with the other pickups, move the green to switch and the black to the back of the pot.

[sevenfacedsin]

Re: changing IbanezRG470 V8 bridge PUP

should the invader be out of phase with the two stock pickups?

[Robert S.]

Re: changing IbanezRG470 V8 bridge PUP

http://www.ibanez.com/wiring/wire.asp?y=2002&w=RG470

Ibanez red = SD black
Ibanez white = SD red/white
Ibanez sheild = SD green/plain

[Trev]

Re: changing IbanezRG470 V8 bridge PUP

For Ibanez wiring diagrams and parts go to

https://www.ibanez.com/support

[sevenfacedsin]

Re: changing IbanezRG470 V8 bridge PUP

"Ibanez red = SD black
Ibanez white = SD red/white
Ibanez sheild = SD green/plain"

does this mean ibanez white = SD red AND white, or SD red OR white?

[RG 2570]

Re: changing IbanezRG470 V8 bridge PUP

im having trouble changing my rg470's stock bridge pickup to a SD SH8 invader.
ive tried the SD website schematic and it doesnt work.
4 wires come out of the invader, a red one, white one, black, green and bare.
anybody have a diagram for a standard ibanez with 2 HUM, 1 single, 1 vol, 1 tone?
or does anyone know how to put the invader on, without knocking out the other two pickups?

_____________________
2002 ibanez rg470
rg550 wizard 2 neck
lo-trsII tremolo
neck - V7
mid - V6
bridge - seymour duncan sh8 invader
planet waves trim-lock tuners
digitech genesis 1
_____________________
2001 ibanez rg170
wizard neck - now fretless.
5 string custom.
piezo bass pickup

I play ibanez stuff, what you want to do if you are only replacing the V-8, is to take the black duncan invader wire and solder where the V-8's red wire was, then twist the white/red invader wires together and solder them to where the V-8's white wire was.(this is for coil cut)
the invaders green/bare go to the top of the pot
it will be in phase with the s-1 in the middle

[Marcel]

Re: changing IbanezRG470 V8 bridge PUP

"Ibanez red = SD black
Ibanez white = SD red/white
Ibanez sheild = SD green/plain"

does this mean ibanez white = SD red AND white, or SD red OR white?

it means red and white (soldered together)
wire it this way and it should work! My Duncan is in phase with my ibanez V1/S1 Combo! So i think it should be in pahse with yours too