does it matter, pu in the wrong way

[mrfjones]

Re: does it matter, pu in the wrong way

if you just unscrew the mounting ring the ring and the pickup lift out of the guitar. you can then just unscrew the only two screws that hold the pickup in place on the ring. flip it around, so that the screw poles are toward the neck then put things back the way they were. if there isn't any slack in the cable and you want it turned around then i would take it back to the place you had it installed and tell them to do it. they should do it for free.

[Davey]

Re: does it matter, pu in the wrong way

i got it in the guitar that way (check my profile picture).. cos the wires are not long enough (seriously.. i didnt cut them one bit) i love the way it sounds. i imagine that it will sound a tad more bassier if you turn the screws towards the bridge, but i havent tried as i said the wire is too short to turn it

well.. what guitar do you have it in? problems occur if the switch is far away from the pup and if the tech cut the cord. if it's long enough though.. just unscrew the whole mount ring and flip it 180 degrees