banner

Announcement

Collapse
No announcement yet.

Help With Wiring PIC

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • HolyDirt
    replied
    first of all, if your wiring lp style wiring, its wrong so far, on the 2 pots on the right(of the picture) the capacitor should be attached to the middle lug of the pots, then ground the left lug(the left lug when looking at the put with the shaft up and lugs pointed towards you) on both of the pots on the right(of the picture)
    the hot leads go into the right lugs of the pots on the left(of the picture), one hot lead per pot, then then wire the middle lug of the 2 left pots to the toggle. THERE YA GO!

    Leave a comment:


  • darkshadow54321
    started a topic Help With Wiring PIC

    Help With Wiring PIC

    Using this as the base for the wiring:



    Where do I solder the pickup wires and toggle wires? This is for a Les Paul. Thanks.


    <------ gratuitous use of smiley...
Working...
X