banner

Announcement

Collapse
No announcement yet.

"Series/split/parallel w/ phasing" on SD. w/ a pushpull do u get split or parallel?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • "Series/split/parallel w/ phasing" on SD. w/ a pushpull do u get split or parallel?

    http://www.seymourduncan.com/website...r_w_phase.html

    if you do this using both dpdt push/pull pots, will it give you split or parallel when pulled?

  • #2
    Re: "Series/split/parallel w/ phasing" on SD. w/ a pushpull do u get split or parallel?

    Originally posted by Cory_Dylan
    http://www.seymourduncan.com/website...r_w_phase.html

    if you do this using both dpdt push/pull pots, will it give you split or parallel when pulled?
    if you use 2 push/pulls to do this one will toggle series/parallel and the other will toggle in phase/out of phase

    Comment


    • #3
      Re: "Series/split/parallel w/ phasing" on SD. w/ a pushpull do u get split or parallel?

      Originally posted by Cory_Dylan
      http://www.seymourduncan.com/website...r_w_phase.html

      if you do this using both dpdt push/pull pots, will it give you split or parallel when pulled?
      SD used to have a sheet enclosed with all their pups outlining these options ... that being said ... yes the phase switch (one on right of linked diagram) controls the phase, the other controls series/parallel ... BUT when a on/on/on toggle is used, the phase switch has the benefit of selecting which coil is turned off in the split mode, it still effects it's phase when used with another pup though, but by itself you can't tell a difference.
      ::::To sound reinforcement engineer::::
      ... What? ... ::::snicker:::: ...Yes, ... Right, ...
      Could we please have everything louder than everything else ? ...

      Comment


      • #4
        Re: "Series/split/parallel w/ phasing" on SD. w/ a pushpull do u get split or parallel?

        This is basically the same thing holydirt said, but in a slightly different way:
        If you use push/pull pots, you lose the "split" option.

        The left hand switch gives you series/parallel relative to itself, the right-hand switch gives you phase-reversal relative to the "other" pickup. (The absolute phase of a single pickup isn't very meaningful.)

        Comment

        Working...
        X