Tweet
I was looking through the different sd pups and i came across the distortion trembucker, has way more output then the dd or jb. just wonderin if anyone here has used it and how would it sound in a fat strat with alot of upper mids.
-
-
Re: Any One Know Anything Bout The Distortion Trembucker??????
I installed one in a friends fat Strat and balance-wise it was very nice but it is fairly dark overall. The Distortion Trembucker is very hot, so only put it into a guitar that you want to play distorted with. It will take an amp with a lot of headroom to get deceint clean tones.www.soundclick.com/failedgrace
www.myspace.com/robert_sherman
http://www.facebook.com/profile.php?id=1513342220
T4D got a new gig!
(Please send sig worthy material!) -
Re: Any One Know Anything Bout The Distortion Trembucker??????
1Comment
-
Re: Any One Know Anything Bout The Distortion Trembucker??????
If you mean the PAtb-2 the only thing i know about it is that tony macalpine uses them
1957 RI gibson historic black beauty lester(DD/JAZZ)
2003 gibson zakk wylde custom shop lester (stock EMG)
1996 gibson lester custom(DD/59 neck)
1997 fender lone star (DD TB-6/duckbucker/lil 59)
Marshall ZW 2203 100 watt top
5150 block letter head
4 1960B marshall cabsComment
-
Re: Any One Know Anything Bout The Distortion Trembucker??????
I have one in my USA Fusion, and Iīm a bit undecided on whether I like it or not...Iīm gonna replace it soon with something i "know" tonally, then I can give you a better estimate.....my current Impression is very thick and crunchy, but not bass heavy at all, with lots of harmonics and upper mids.....too much upper mids for me, thatīs why itīs coming out...
But Again, I donīt know how much of that is the pickup and how much is the guitar yet. The cool rails I put in doesnīt quite sound like I expected, either
Zerberus Industries: Where perfection just isn't good enough.
Listen to my music at http://www.soundclick.com/infiniteending and www.subache.comComment
-
Re: Any One Know Anything Bout The Distortion Trembucker??????
Currently replacing it with a DImebucker, ...after playing over my stage rig I tend to agree almost more with robert than with myself.... will post update soon.....Zerberus Industries: Where perfection just isn't good enough.
Listen to my music at http://www.soundclick.com/infiniteending and www.subache.comComment
-
Re: Any One Know Anything Bout The Distortion Trembucker??????
Ok, now that Iīve tested it in 2 guitars:
It IS fairly dark, but it doesnīt have the "range" towards the bottom that I like, doesnīt sound "deep" enough...I put it in my Rhoads (a fairly dark guitar which had the dimebucker in it before and was too boomy), and it fits her perfectly, because the rhoads lacks in exactly the frequencies that the PATB-2 accentuates...I was considering trading it off, but not anymore
And as a Side Note: putting the Dimebucker in the Fusion made her almost perfect as well
Zerberus Industries: Where perfection just isn't good enough.
Listen to my music at http://www.soundclick.com/infiniteending and www.subache.comComment
Comment