banner

Announcement

Collapse
No announcement yet.

My Start Mod. help! :)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ArtieToo
    replied
    Re: My Start Mod. help!

    btw - In the above diagram, I'm pretty sure its "B" where you want to connect the red/white combo of the neck pup. I normally keep a 5-way on my desk, but I installed it into my Start.

    Leave a comment:


  • Toto
    replied
    Re: My Start Mod. help!

    oh, yeah! sorry i was in a harry so i wrote start instead of STRAT
    sorry

    Leave a comment:


  • STRATDELUXER97
    replied
    Re: My Start Mod. help!

    Originally posted by Toto
    hi everyone!

    help me to wire a new mod for my strat-copy guitar.

    my PUs:
    Neck: Lil'59
    Middle: Duckbucker
    Bridge: Hot Rails

    all Humbuckers are 4 conductor.

    thats what i want:
    (switch positions)
    1. Neck PU only
    2. Neck Split + Middle
    3. Middle Only
    4. Neck + Bridge
    5. Bridge Only

    (tone and volume)
    1. Master Volume
    2. Master Tone
    3. Bridge Volume only (will this effect on Hot Rails Sound?)

    Thanks!
    Hey,what's a start mod anyway?

    Leave a comment:


  • Toto
    replied
    Re: My Start Mod. help!

    2 Artie: Thanks for thread about 2 pots

    Leave a comment:


  • ArtieToo
    replied
    Re: My Start Mod. help!

    Sorry, I was still working on the diagram.

    Do this:



    I don't have the switch in front of me, so I can't remember one thing. The red/white combo of the neck pup will go to either A or B. Just look closely at the switch and see which terminal is shorted to the middle when in the #2 notch position.

    Edit: When I say "shorted to the middle" I mean shorted to the terminal labeled "ground".

    Leave a comment:


  • Toto
    replied
    Re: My Start Mod. help!

    mmmmm sorry but how i'll get neck split(!!??) + middle if i only change hot wires in 5 way switch?

    Leave a comment:


  • Toto
    replied
    Re: My Start Mod. help!

    ok thanks!
    and what about pots?

    Leave a comment:


  • ArtieToo
    replied
    Re: My Start Mod. help!

    There's two ways to do this: the expensive way, or the cheap and easy way - with a small concession.

    1. Use a Superswitch. (Around $15.00)

    2. Reverse the neck and middle hot wires on the 5-way. (Along with a simple mod to the wiring.)
    That will give you:

    1. middle
    2. neck split and middle
    3. neck
    4. neck and bridge
    5. bridge

    Notice that the only thing different is we've reversed the #1 and #3 positions. This is how I have my Genny wired.

    Leave a comment:


  • Toto
    started a topic My Start Mod. help! :)

    My Start Mod. help! :)

    hi everyone!

    help me to wire a new mod for my strat-copy guitar.

    my PUs:
    Neck: Lil'59
    Middle: Duckbucker
    Bridge: Hot Rails

    all Humbuckers are 4 conductor.

    thats what i want:
    (switch positions)
    1. Neck PU only
    2. Neck Split + Middle
    3. Middle Only
    4. Neck + Bridge
    5. Bridge Only

    (tone and volume)
    1. Master Volume
    2. Master Tone
    3. Bridge Volume only (will this effect on Hot Rails Sound?)

    Thanks!
    Last edited by Toto; 05-10-2005, 03:01 AM. Reason: Was "Start" :)
Working...
X