banner

Announcement

Collapse
No announcement yet.

JB + 59n + superswitch wiring help please!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    Re: JB + 59n + superswitch wiring help please!

    Mr Kent check your PMs :-)

    Comment


    • #47
      Re: JB + 59n + superswitch wiring help please!

      bump

      Comment


      • #48
        Re: JB + 59n + superswitch wiring help please!

        Flash how did it go?
        Me and Neal's stage rig.

        Comment


        • #49
          Re: JB + 59n + superswitch wiring help please!

          Thanks for all the help guys. i've tried a few of the setups you have suggested but they are still not what i'm looking for :-(
          So if any of you helpfull fellows could provide a diagram for
          1 neck series
          2 neck parallel
          3 neck and bridge (full humbucking like a les paul wiring,series?)
          4 neck and bridge (parallel)
          5 bridge series
          for my bridge JB and neck 59 and superswitch I promise not to bother you again lol :-)
          Cheers guys

          Comment


          • #50
            Re: JB + 59n + superswitch wiring help please!

            Originally posted by Flash
            Thanks for all the help guys. i've tried a few of the setups you have suggested but they are still not what i'm looking for :-(
            So if any of you helpfull fellows could provide a diagram for
            1 neck series
            2 neck parallel
            3 neck and bridge (full humbucking like a les paul wiring,series?)
            4 neck and bridge (parallel)
            5 bridge series
            for my bridge JB and neck 59 and superswitch I promise not to bother you again lol :-)
            Cheers guys
            You don't have enough poles available on that switch for that, at the very least you'd need 6, (bear in mind that's just eyeballing it though) ... a 6P5T non-shorting rotary would do you (again just eyeballling it). Hey Artie, seems like we've been down this road before huh?
            ::::To sound reinforcement engineer::::
            ... What? ... ::::snicker:::: ...Yes, ... Right, ...
            Could we please have everything louder than everything else ? ...

            Comment


            • #51
              Re: JB + 59n + superswitch wiring help please!

              What selection/position is the one causing the bother?

              Comment


              • #52
                Re: JB + 59n + superswitch wiring help please!

                You want series and parallel functions, you have eight conductors ... two have to go to ground ... okay problem solved, two have to be hooked to hot, and be unhooked ... that's two poles (one for each hot, two pups), then you have four conductors that must be hooked in pairs, either in series (such as the white&red {SD colour code}, or sent to their respective hots, and grounds {parallel mode} ... that four poles right there, bringing you to six poles. My advice would be go to www.stewmac.com and look up the *free info sheets*, on the superswitch, and how humbuckers are phased, put in series and parallel. Then grab a piece of paper and pencil (eraser too), and start drawing it out for yourself, when you start running into problems you'll see them clearly for yourself. That's really the best way, plus I had sent you two different schematics with a wide range of options, maybe not exactly what you wanted, but very versatile set ups.
                ::::To sound reinforcement engineer::::
                ... What? ... ::::snicker:::: ...Yes, ... Right, ...
                Could we please have everything louder than everything else ? ...

                Comment


                • #53
                  Re: JB + 59n + superswitch wiring help please!

                  Cheers Kent, i'll give it a try and see what I can come up with

                  Comment

                  Working...
                  X