banner

Announcement

Collapse
No announcement yet.

Is my Alnico Pro II pickup neck or bridge version?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Vasshu the humanoid typhoon
    replied
    Re: Is my Alnico Pro II pickup neck or bridge version?

    Probally made with different amount of thread as well??

    Leave a comment:


  • Jeff_H
    replied
    Re: Is my Alnico Pro II pickup neck or bridge version?

    I have a set of the APH's, and there is a definate difference in the tone between the bridge and neck. DC resistance is the best way to tell.

    Leave a comment:


  • Vasshu the humanoid typhoon
    replied
    Re: Is my Alnico Pro II pickup neck or bridge version?

    Well in the old days there where none actually.

    Leave a comment:


  • korovamilkdud
    replied
    Re: Is my Alnico Pro II pickup neck or bridge version?

    .25? Kinda makes you wonder if there's any real difference at all.

    Leave a comment:


  • ArtieToo
    replied
    Re: Is my Alnico Pro II pickup neck or bridge version?

    If you have access to a decent quality meter, you can measure its DC resistance.
    The bridge version should measure around 7.85k ohms.
    The neck version, around 7.6k ohms.

    The problem is, with anything less than a "lab-grade" meter, that degree of variance could be within the meters own accuracy.

    Perhaps, someone else will have a better technique.

    Leave a comment:


  • MrEzzyE
    started a topic Is my Alnico Pro II pickup neck or bridge version?

    Is my Alnico Pro II pickup neck or bridge version?

    I got an used Alnico Pro II pickup. The sticker has been removed. Is there any other way to find out which one I have?
Working...
X