Tweet
First time builder/modifier here so forgive me if this is a stupid question. I'm building a custom Tele and I wanted to use a Single Coil in the neck pickup, and the Tele Style Humbucker (Hot Rails Tele) in the bridge spot with only a 3 way switch, 1 volume, 1 tone. There doesn't seem to be a wiring diagram for this. There is one for that exact setup but a 4 way switch (for running in series). I don't have any interest in running the pickups in series. There is also a diagram for a 3-way switch, 1 vol, 1 tone but with a standard humbucker rather than the Tele Style, so I was wondering if the wiring would be the same for using a Tele Style Humbucker as it is for a standard humbucker.
Talk with your fellow tone freaks on the web's liveliest (and friendliest!) tone forum. All are welcome, from seasoned pros to absolute beginners.
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Tech experts from Seymour Duncan are regularly on this forum, and are clearly labeled as employees of Seymour Duncan. They are here to help.
Comment