Has anyone used on before? I was going to buy one and was wondering what experiences anyone had?
Announcement
Collapse
No announcement yet.
Seymour Duncan Liberator Volume Pot
Collapse
X
-
If you swap out pickups a lot, it will help. You have to solder it in to start, but then it makes it easy to try out a bunch of different pickups without soldering. I will say that it is sort of big, and if your control cavity is pretty packed, you might have to get the pot out of the cavity to wire things in. If that's what you need in your project, it does fine. It is a pretty unique product.Administrator of the SDUGF
- Likes 1
Comment
-
Originally posted by Mincer View PostIf you swap out pickups a lot, it will help. You have to solder it in to start, but then it makes it easy to try out a bunch of different pickups without soldering. I will say that it is sort of big, and if your control cavity is pretty packed, you might have to get the pot out of the cavity to wire things in. If that's what you need in your project, it does fine. It is a pretty unique product.
Comment
-
I have been looking at wiring diagrams for the Liberator and had a question about using a 5 way super switch with the Liberator? I was hoping to have a HH Strat with the following wiring setup:
Position 5: Bridge series
Position 4: Outer coils of Neck and bridge
Position 3: both humbuckers
Position 4: inner coils
Position 5: Neck series
Has anyone ever tried a wiring scheme like this using the Seymour Duncan Liberator?
From what I understand of the Liberator, it acts as a "hub" for the pickups to be wired into while having a separate section of the Liberator go to the pots and switches in the guitar.
The guitar will only have 1 volume knob and no tone switch. I was hoping to use a 5 way super switch, but can use a 3 position switch instead if the wiring scheme described above is not possible. I would like to be able to use the outer and inner coils, but is not totally essential.Last edited by Guitarmusic; 12-01-2020, 10:43 PM.
Comment
-
Originally posted by Guitarmusic View PostI have been looking at wiring diagrams for the Liberator and had a question about using a 5 way super switch with the Liberator? I was hoping to have a HH Strat with the following wiring setup:
Position 5: Bridge series
Position 4: Outer coils of Neck and bridge
Position 3: both humbuckers
Position 4: inner coils
Position 5: Neck series
Has anyone ever tried a wiring scheme like this using the Seymour Duncan Liberator?
From what I understand of the Liberator, it acts as a "hub" for the pickups to be wired into while having a separate section of the Liberator go to the pots and switches in the guitar.
The guitar will only have 1 volume knob and no tone switch. I was hoping to use a 5 way super switch, but can use a 3 position switch instead if the wiring scheme described above is not possible. I would like to be able to use the outer and inner coils, but is not totally essential.
If you already have a wiring diagram that you'd want to use, post it here and i can review and confirm that its error free, plus advise you on how to mod it to accomodate the connections to and from the liberator. If you don't have a diagram already, i could mod one from my collection to accomodate the Liberator.
[Edit: just reread your earlier post where you said you have a strat. Nevermind the caution below, i happen to know that a strat's cavity is tall enough to accomodate the taller superswitches.]
Before buying a superswitch, take a measurement of the height dimension in your control cavity. Some make/models of superswitches can be too tall for some thin guitars, so you'll want to know which superswitches will and won't fit in your particular guitar before you buy one.Last edited by Jack_TriPpEr; 12-01-2020, 11:01 PM.Sanford: "The hardest part about tone chasing is losing the expectations associated with the hardware."
Comment
-
Originally posted by Jack_TriPpEr View Post
Yes, it's possible. The Liberator has a wire extension for each of the 8 wires coming into it from the two 4-conductor pickups that you would be using, so there really isn't any reason that the Liberator would limit what wiring diagram/scheme you would want.
If you already have a wiring diagram that you'd want to use, post it here and i can review and confirm that its error free, plus advise you on how to mod it to accomodate the connections to and from the liberator. If you don't have a diagram already, i could mod one from my collection to accomodate the Liberator.
[Edit: just reread your earlier post where you said you have a strat. Nevermind the caution below, i happen to know that a strat's cavity is tall enough to accomodate the taller superswitches.]
Before buying a superswitch, take a measurement of the height dimension in your control cavity. Some make/models of superswitches can be too tall for some thin guitars, so you'll want to know which superswitches will and won't fit in your particular guitar before you buy one.
Comment
-
Originally posted by Guitarmusic View Post
Ok, thank you. I am using a guitar body from Warmoth. I'll check it out and see what the height looks like. I might actually have a super switch lying around somewhere too. I am using one Seymour duncan Pickup and one Dimarzio Pickup so I would need a diagram that helps explain both. I'll try and find some wiring diagrams and see what I can find. First I'll look for the super switch. Thank you!
since i have to mod the diagram to accomodate the Liberator anyways, it'll be quicker and easier if i just pick a diagram from my existing collection. So really the only thing I would need from you at this point is:
1. What is the model of each pickup, and which one do you want to put in the neck position and which do you want to put in the bridge position?
2. what is the make/model of superswitch you will be using? Some of them have the lugs arranged differently from other types, so i would want to design the look of it in my diagram to match qhat you have.
Sanford: "The hardest part about tone chasing is losing the expectations associated with the hardware."
Comment
-
Originally posted by Jack_TriPpEr View Post
Ok. Fyi: each pickup will need to be a 4 wire version (vs old school 2 wire version) to do the kind of coilsplitting that you want to do.
since i have to mod the diagram to accomodate the Liberator anyways, it'll be quicker and easier if i just pick a diagram from my existing collection. So really the only thing I would need from you at this point is:
1. What is the model of each pickup, and which one do you want to put in the neck position and which do you want to put in the bridge position?
2. what is the make/model of superswitch you will be using? Some of them have the lugs arranged differently from other types, so i would want to design the look of it in my diagram to match qhat you have.
The neck pickup will be the Screamin Demon
The Bridge Pickup will be the Dimarzio Norton
I hope this helps, it is very nice of you to offer your help in this way. I am not in a big rush because I have several parts I am still waiting to come in for the guitar.
Comment
-
It's a bit clunky in form and in use...but it works. I have two in my pickup tester guitar, which is all about speed/convenience of swaps, and minimizing variables.
I would not recommend one for "normal" use. There's no point. Its only good purpose is for dedicated pickup testing, IMO. If you are not a gear blogger or testing products for a pickup manufacturer, you have problems if you are swapping that much.Originally posted by LesStratYogi Berra was correct.Originally posted by JOLLYI do a few chord things, some crappy lead stuff, and then some rhythm stuff.
Comment
-
Originally posted by ItsaBass View Post....If you are not a gear blogger or testing products for a pickup manufacturer, you have problems if you are swapping that much.
Sanford: "The hardest part about tone chasing is losing the expectations associated with the hardware."
Comment
-
I think the Liberator has usefulness outside of gear bloggers. If you are a musician that works with several different projects, or a theater musician playing for many shows, or even someone who likes to change pickups out every few weeks, it makes things easy. It is a little big for some cavities, and it might not save a lot of time with guitars with pickguards, but it is a useful tool.Administrator of the SDUGF
- Likes 2
Comment
-
Originally posted by Guitarmusic View PostPosition 5: Bridge series
Position 4: Outer coils of Neck and bridge
Position 3: both humbuckers
Position 4: inner coils
Position 5: Neck series
Has anyone ever tried a wiring scheme like this using the Seymour Duncan Liberator?
I have mixed emotions about the Liberator. I bought one just so I could hold it in my hand and see how it's configured. It's never been installed in anything because my solder skills are "up to snuff", so to speak. But I do see one shining example of its use:
Let's say you're someone who wants to try various pups in your Les Paul. (Just as an example.) And lets say you're neither good at soldering, or have the equipment. You take it to a good tech and let them wire up the whole guitar, with the Liberator. Now, you can swap to your hearts delight with just the supplied screwdriver.
My 2-cents worth.
- Likes 2
Comment
Comment