My Washburn USA Silverado and just swapped everything and it's still here. Entire harness Jack and dropped in a Retrospect Surfer II Set today. Was buzzing when you took your hands off the metal on the guitar and still have the same thing so? Double checked all the grounds including the claw ground and all are secure. Does not make sense.
Here is what i used on the complete rewire and there is a guy over on TGP that does these dirt cheap with absolutely impeccable work.
CTS 300K volume pot, 2 CTS 250k pots for tone
Wired with one tone to bridge (.022uF cap) and one tone for neck (.047uF cap) - no tone on middle pickup and orange drops.
Oak Grigsby 5 way switch
Comes with wired jack, '57 Fender style ground plate and wired with Gavitt cloth 22awg stranded wire
Only thing I can figure is the guitar like one of my other Washburn USA guitars with the same Wilkerson has a weird black block on the Wilkerson 100. It does the same thing even with humbuckers if the volume is up and are not touching metal on the guitar. I wonder if that funky black block is keeping the bridge from fully grounding? Got any ideas here guys?
Here is what i used on the complete rewire and there is a guy over on TGP that does these dirt cheap with absolutely impeccable work.
CTS 300K volume pot, 2 CTS 250k pots for tone
Wired with one tone to bridge (.022uF cap) and one tone for neck (.047uF cap) - no tone on middle pickup and orange drops.
Oak Grigsby 5 way switch
Comes with wired jack, '57 Fender style ground plate and wired with Gavitt cloth 22awg stranded wire
Only thing I can figure is the guitar like one of my other Washburn USA guitars with the same Wilkerson has a weird black block on the Wilkerson 100. It does the same thing even with humbuckers if the volume is up and are not touching metal on the guitar. I wonder if that funky black block is keeping the bridge from fully grounding? Got any ideas here guys?
Comment