Tweet
I'm getting ready to swap out pickups and electronics in a G&L ASAT tribute Bluesboy. I got a little 59 for the bridge and a p-rails for the neck. I'm looking for a wiring sanity check before I start. My goal was to have the little 59 wired in series or parallel with a push/pull pot and the p-rails wired in p-90 or series humbucker with a push/pull pot. The rest of the wiring was intended to be a more standard tele wiring with 1 volume, 1 tone, and 3 position switch. Please let me know if anyone sees any issues with the wiring I have posted. Thank you.
Talk with your fellow tone freaks on the web's liveliest (and friendliest!) tone forum. All are welcome, from seasoned pros to absolute beginners.
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
Tech experts from Seymour Duncan are regularly on this forum, and are clearly labeled as employees of Seymour Duncan. They are here to help.
Comment