Ibanez 3SWLSC 5 way switch

[Joelawil]

Can anyone show or tell me how to wire a set of SH-4’s to an Ibanez 3SWLSC 5 way switch? I’ve been pulling my hair out trying to figure it out.

Guitar is Ibanez RG6003FM

[Mincer]

Welcome to the forum!

Would you happen to have a pic of the switch?

[Joelawil]

With stock wiring

[beaubrummels]

Neck side (as written on the PC board)
GND = Bare
"UPPER" COLD = Green
"UPPER" HOT = Red
"LOWER" COLD = White
"LOWER" HOT = Black

Bridge side
OUT = Volume Pot Input
GND = Volume Pot Ground
GND = Green+Bare
TAP = Red+White
HOT = Black

[Joelawil]

I wired it in that way, still getting terrible buzz when the strings are muted.

[Mincer]

Any chance the jack is wired backwards?

[beaubrummels]

You get buzz in all switch positions? Did you remember to put the bridge (not the pickup, the string bridge) ground back to the volume pot?

[Joelawil]

The only connections I unsoldered were from the stock pickups to the switch, and the stock neck pickup to the volume pot..

[ThreeChordWonder]

Did you remember that the pickup bare wires ALWAYS go directly to ground on a pot casing, never via a switch?

[6ths3ns3]

I found this on the google search. I have the same 5 way switch as described above and two sd black winter neck and bridge
this is what i found
is this correct diagram or its wrong? Shoud i try the diagram posted abive or this one?
thanks.

[6ths3ns3]

The solution for seynmour duncan is what i found and it wotks.

[ehdwuld]

How tall is that switch