banner

Announcement

Collapse
No announcement yet.

Help Installin pickup

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
    ArtieToo
    Peaveyologist

  • ArtieToo
    replied
    Re: Help Installin pickup

    Hmmm . . . that is odd. If you mean that the 3-way switch is operating backwards, can you just loosen the nut, and rotate it 180 deg's?

    That would save you swapping the two wires around.

    Leave a comment:

  • spannyspan
    Junior Member

  • spannyspan
    replied
    Re: Help Installin pickup

    Thanks alot! I got it to work. But I ran into another problem. The neck pick up is now acting as the bridge pick up. And vice versa. This is weird because the wires from the old pick up were connected to the same place the new ones were for the duncan. Any ideas what my problem is?

    Leave a comment:

  • ArtieToo
    Peaveyologist

  • ArtieToo
    replied
    Re: Help Installin pickup

    The black and white wires are the wires to the "stud" coil, which should have worked. However, try this diagram:

    2hb_2vol_2tone_3way

    That should do what you want.

    Leave a comment:

  • spannyspan
    Junior Member

  • spannyspan
    started a topic Help Installin pickup

    Help Installin pickup

    Hello guys, I've come to a stop here tryin to install a pick up. I have an Ibanez Iceman 400 with 2 humbuckers, 2 tone, 2 volume, and 3 way switch. I'm tryin to install a neck distortion pick up but i'm nto gettin any sound. I looked at the guides on the website and followed the instructions but no luck. I'd like to note this is my first time doing this. I took sum crap pictures with a web cam of my current wiring.

    http://sellingfeeny.neoburn.net/rocket/5.jpg - entire wiring

    http://sellingfeeny.neoburn.net/rocket/6.jpg - volume knob

    I put the numbers 1 and 2 depicting where the connections of the previous pick ups were at. The old pick up only had 3 wires, a red, which was cut off, a white, and a black wire. The white wire was attached to 2 and the black wire was attached to 1. So when I went to install the duncan pick up, it came with four wires. So as stated previously, i followed the intruvtions and nothing worked. SO then, i tried connect onyl the black and white wires and nothin. Any help would be appreciated.
Working...
X