banner

Announcement

Collapse
No announcement yet.

NEED HELP...Trembucker Spacing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • NEED HELP...Trembucker Spacing

    I ordered an SH-11 custom / custom for my bridge position pup on my strat clone a few days ago. The strat has a normal strat trem bridge, and the stock Duncan Designed humbucker in it is installed at about a 20 degree angle compared to my single coil pups.

    Should I have order a TB-11 for this ?? Will the SH-11 work ??

    I'm starting to get that sinking feeling I made a wrong decision here...

    Any help would be appreciated...
    David Rossi
    The Underhills
    www.theunderhills.com

  • #2
    Re: NEED HELP...Trembucker Spacing

    Originally posted by rossipsu1
    I ordered an SH-11 custom / custom for my bridge position pup on my strat clone a few days ago. The strat has a normal strat trem bridge, and the stock Duncan Designed humbucker in it is installed at about a 20 degree angle compared to my single coil pups.

    Should I have order a TB-11 for this ?? Will the SH-11 work ??

    I'm starting to get that sinking feeling I made a wrong decision here...

    Any help would be appreciated...
    if i am understanding you correctly it has a hummer that is tilted?
    well if that s the case you did the right thing by ordering a standard spaced pup
    old eddie van heflin used to use his normal spaced pups on a slant

    Comment


    • #3
      Re: NEED HELP...Trembucker Spacing

      Originally posted by RG 2570
      if i am understanding you correctly it has a hummer that is tilted?
      well if that s the case you did the right thing by ordering a standard spaced pup
      old eddie van heflin used to use his normal spaced pups on a slant
      The bridge pickup is slanted like an American Strat, except it's a humbucker. It has a vintage trem bridge...

      David Rossi
      The Underhills
      www.theunderhills.com

      Comment


      • #4
        Re: NEED HELP...Trembucker Spacing

        Measure the distancee from e to e. If its under 2 inches (51 mm), standars spaced will line up better. If itīs 2" or more, a TB will
        Zerberus Industries: Where perfection just isn't good enough.

        Listen to my music at http://www.soundclick.com/infiniteending and www.subache.com

        Comment


        • #5
          Re: NEED HELP...Trembucker Spacing

          Originally posted by Zerberus
          Measure the distancee from e to e. If its under 2 inches (51 mm), standars spaced will line up better. If itīs 2" or more, a TB will
          It's a shade under 2" from E to E on a vertical measure, but whats throwing me off is the slant of the pickup. Obviously, any degree of a slant will INCREASE the spaced distance between poles.

          I guess I should measure on the slant...
          David Rossi
          The Underhills
          www.theunderhills.com

          Comment

          Working...
          X