Good Karma Thread

[IndySG]

Re: Good Karma Thread

I got a set of Gibson Modern 3x3 tuners in chrome like new in an opened package complete with screws.

Thanks for the tuners... hope to get them fitted soon!

Note to all on the forum, this man is a true gent

[brunogio]

Re: Good Karma Thread

Thanks for the tuners... hope to get them fitted soon!

Note to all on the forum, this man is a true gent

Thanks Indy, you are too kind.

I've tried to sell these here and other forums so many times and am glad someone will get to use them.

[EEF13]

Re: Good Karma Thread

ok, below are a few pictures of what I have to offer:

- Strat SSS white pickguard
- Telecaster BWB pickguard
- Telecaster WBW pickguard
- Strat SSS shield
- Three white trem covers. These are imports (ie, screw spacing)
- Squier Neckplate. No screws
- Fender Highway 1 bridge with hardware (a little rusty)
- Pair of mini-humbucker rings
- Four Seymour Duncan single-coil covers (three are bright white, one is yellowy)
- two black single-coil covers (no holes) ONE TAKEN
- Gibson USA trussrod cover
- import 5-way switch
- Bournes 500k push-pull pot (new) TAKEN
- 2 Strat input jacks
- strat VTT knobs (very relic'd yellowed)
- 4 black slector switch tips for Strat. One White
- White strat trem-bar tip
- 10 Fender-issued caps (.047)
- 6 HUGE caps for single-coils (.047). They are likely for amps... I bought and didn't notice the size
- SX Gigbag TAKEN

I am interested in the mini humbucker rings.

[EEF13]

Re: Good Karma Thread

I have some old Peavey USA Single Coils that I don't use.

[The Guitar]

Re: Good Karma Thread

A9 Magnet, which was deguassed by 30% to match the A8 output TAKEN
A4 Magnet TAKEN
2 Proline humbucker rings, only have 4 black mounting screws for the Neck ring, the springs/screws are TAKEN
500k alpha audio push/pull, this was too long for my fender style pickguard, but I don't think it is a long shaft. If you're interested I can take measurements
2 EMG Style plastic humbucker covers

Do you still have the pickup covers? If so, pm me please. Sorting the parts drawer for some goodies. Post em after work!

[Martian]

Re: Good Karma Thread

Dali,

I could use that Squier neckplate.

[The Dali]

Re: Good Karma Thread

Dali,

I could use that Squier neckplate.

Sure, send me a PM with your address.

[The Guitar]

Re: Good Karma Thread


Chrome and black schaller strap lock parts for a strap. 2 saddles from a Memphis strat, one has part of a screw in the back of it. Speed knobs, 3 single coil covers, 2 are the same and 1 isn't.

-Ernie Ball straplocks are taken!
-Epi pickups taken!
-Tom and stopbar parts taken!

[Franknfilms]

Re: Good Karma Thread

Set of Ernie ball straplocks

PM sent to claim the straplocks

[CTN]

Re: Good Karma Thread

awesome thread idea. I just ran through my parts boxes quickly, got a bunch of stuff I'll post sometime tomorrow

[Agileguy_101]

Re: Good Karma Thread

PM incoming The_Guitar

If anyone has a three way switch, an output jack, or any kind of halfway decent tuners, I need those. Got a cool project in mind.

[Agileguy_101]

Re: Good Karma Thread

All right, here's what I have.



Gibson style plastic bell knobs. Elite style knobs are gone.



- The strap side strap locks for they dunlop system. No guitar side, sorry.
- Two sets of chrome strap buttons. Black pair is gone and replaced with the chrome set.
- Potentiometer shaft adapter bushing things. Lets you use set screw knobs on split shaft pots.



Two sets each black and cream plastic pickup rings. Flat bottoms with separate heights for neck and bridge. One pair of the creams is gone, one left.

Pikachu NOT for sale.



- XLR to 1/4 inch cable. Pretty long.
- A ****load of the little speaker things that let you attach them to the tabs without soldering. I accidentally ordered wayyy too many.

More as I find it.

EDIT: Both sets of pickup rings, the blender pot, and the knobs are gone. They're shipping out today guys!

[Hartfeltmusic2010]

Re: Good Karma Thread

Some more stuff maybe some of you guys can use.
.047uf capacitors
Pickup springs
Floyd rose trem springs
Locking nut screws
I have a large roll of 4 conductor hookup wire for Pickups. Its pretty good stuff if any of you guys are interested I can spare some footage.
Ill keep digging and post more if I find it

[TheLivingDead]

Re: Good Karma Thread

Ok I'll bite.

PM incoming for the E. (pills)

[The Dali]

Re: Good Karma Thread

PM incoming The_Guitar

If anyone has a three way switch, an output jack, or any kind of halfway decent tuners, I need those. Got a cool project in mind.

Are you looking for a fender 3-way or a gibson 3-way?