Pickups FSOT

[idsnowdog]

Shoot me an offer on any of these and let me know what you have for trade or would like to bu

• 1 black Ibanez INF1 neck pickup with 6 inches of wire. 4 conductor. 8K resistance.
• 1 chrome GFS Deluxe Style mini-humbucker. The mounting holes were drilled out for larger screws and rethreaded. Alnico V magnet. 6 inches of wire. 4 conductor. 9K resistance. Fatter, louder, and more powerful than most Deluxe style mini-humbuckers.
• 1 pair of black Dimarzio style Bridge and Neck humbuckers from an 80's Japanese BC Rich. I suspect these are Matsumoko humbuckers. Ceramic magnets. 6 inches of wire. 4 conductor. Neck 12K and bridge 16K. These sound like a Dimarzio Super distortion clone.
• 1 black Entwistle X2. 6 inches of wire left. 4 conductor. Ceramic magnet. Bridge 16K resistance. Sounds similar to a JB.
• 1 black EMG81. Barely used.
• 1 white Fender humbucker. Short wire which can easily be replaced by soldering to the terminals on the bottom of the pickup.4 conductor. 8K resistance. Sometimes people want these for parts.
• 2 Fender single-coils from a Squier Vintage Vibe 50's strat. Neck and bridge. Leads have been replaced with 6 inches of wire. Alnico III magnets. 6K resistance. These are rumored to be the same pickups as Tonerider Surfari's. While I can't verify where they are made their resistance and their inductance readings are a match for the Surfari set and they are not your run of the mill OEMs and have fiber bobbins.
• 3 white Fleor single-coil pickups. Cloth pushback wires. Fiber bobbins. Beveled Alnico V magnets. Unused. 6-7K resistance.

Photos:
https://forum.seymourduncan.com/spec...kups-fsot-pt-1
https://forum.seymourduncan.com/spec...kups-fsot-pt-2
https://forum.seymourduncan.com/spec...kups-fsot-pt-3

[JB_From_Hell]

I'm interested in the Hotrails style pickups, and probably the PGs as well. I'd love to send you a PM to discuss, but I have 300 non-existent messages stored so I cannot.

[idsnowdog]

I'm interested in the Hotrails style pickups, and probably the PGs as well. I'd love to send you a PM to discuss, but I have 300 non-existent messages stored so I cannot.

The Hotrails from the Charvel came from a late 80's early 90's Japanese Charvel 750. I would accept $20 shipped for the Charvel and the Belcat Hotrails. I would take $50 a piece shipped for the PG's.

[piblock]

I'll buy the PG neck if JB passes. Thanks!

[piblock]

Actually I'll buy both if JB passes, I'd love to have them.

[JB_From_Hell]

Go ahead on the PGs, but I will take the hot rails.

[idsnowdog]

Both will go out tomorrow.