Guest Luthier Series: Jol Dantzig

[Evan Skopp]

Re: Guest Luthier Series Feature's Hamer's Jol Dantzig

this was terrific

another excellent episode in the new series

I have to agree with you. Thanks to everyone who participated. Especially Jol.

Newking70 won the contest. PM sent.

[tone4days]

Re: Guest Luthier Series Feature's Hamer's Jol Dantzig

Jol
thanks again for everything - this was terrific
i just checked out the herrington clip on your blog
OMG that was SERIOUSLY HAPPENIN (any steely dan fans MUST get over there to check it, STAT!) ... the tone was DRIPPING on that thing even through crummy computer speakers of compressed webvideo!

can you get jon to tab those babylon sisters and josie intro grips for us?

peace to you
t4d

ps - evan, good on ya for another excellent episode in the new series - blessings, friend

[Jol Dantzig]

Re: LIVE NOW - Guest Luthier Series Feature's Hamer's Jol Dantzig

While we are here, i may aswell ask you to throw your hat into the ring of the never ending poly vs nitro debate. Do you think one has tonal advantages and if so, are they outweighed by the practical aspects of applying one or the other?

Oh man, that's a barrel full of snakes!

Nitro is nice, but I've played urethane guitars that kicked ass. I prefer thin coats of post-cat lacquer hybrids. There are a few out there including one we helped formulate with McFadden. We've pioneered thin, flat finishes that shine like a ton of poly, but have a warmth like pure nitro. I actually prefer a slightly duller look for my personal guitars and we make thenm on request, such as this Talladega for Jon Herington and this Monaco for Keb' Mo'.

[Jol Dantzig]

Re: LIVE NOW - Guest Luthier Series Feature's Hamer's Jol Dantzig

Is there anything, that when you look back on, you think, maybe that wasn't such a good idea?

Yes.



If I mention them the shred guys will flame me mercilessly.

JUST KIDDING GUYS.

At the risk of sounding all touchy-feely-groovy, I think everything can be a positive learning experience even if it's later dubbed a "bad" idea by some. It does however, depend upon what your goals are. I know a lot of what I know by trying and failing, then trying something different. I encourage all our guys to try stuff (not at the expense of the customer) and learn from their experiences.

But sometimes, passing on that Apple stock in '85 seems like a bad choice.

[Wattage]

Re: LIVE NOW - Guest Luthier Series Feature's Hamer's Jol Dantzig

I know you answered some Cheap Trick questions earlier but with all the guitars you have built for them over the years do you have a favorite?

I remember Johnny Ramone using a Sunburst for a while and even had an ad with Johnny playing one, any good stories about him?

Oh yeah here is my partner in crime with his 80's Custom Shop Hamer, it is still great guitar!

[Jol Dantzig]

Re: LIVE NOW - Guest Luthier Series Feature's Hamer's Jol Dantzig

Jol, it's good to know that you're into bass as well.

With all respect to well-regarded makers like yourself, Alembic, Spector, Pedulla and so on, would you say that Fender got it right with the 2nd-gen P and the vol-vol-tone Jazz, or are there still some advances to make in the field?

Also, to echo the above questions, what do you think of environmentally-responsible woods like teak or bamboo laminate for instrument making?

Sorry, I think I only answered the first part of your question before.

Builders will always keep trying different woods and use what is available to them. I don't think that guitar tone woods are limited to just mahogany, maple, rosewood and so on...

In our segment, we're making a certain kind of article that goes beyond just sound, so in a way we're not bound to those woods, but in a premium priced guitar there are certain expectations, and rarity is one of them.

[Jol Dantzig]

Re: LIVE NOW - Guest Luthier Series Feature's Hamer's Jol Dantzig

Hi Jol - Thanks for all the great years of guitars. I have been a Hamer Fan since '76 and a Hamer owner since '82, a '79 Standard.
My Standard was owned by Dave Hlubek. Any cool recollections of working with him and how many of the Confedrate Flag Standards do you recall making for them?

I have other questions but I got only a minute here at work. Look forawrd to reading the thread at home tonight after work.

THANKS AGAIN For Stopping In.

I remember Dave's guitars pretty well. I think we made two of those flag guitars. Dave was a great guy to work with, but he could get pretty rowdy when we got to partyin'. The whole rock-star thing kinda got them off course and ruined it for them, but Dave would do anything for you if he liked you. He turned a lot of southern rock bands on to Hamer too.

[Jol Dantzig]

Re: LIVE NOW - Guest Luthier Series Feature's Hamer's Jol Dantzig

Dear Jol, i've never really had much money to invest in guitar repair. If something was wrong I always had to learn to fix it, or live with it. From someone who is pulling his hair out due to stress, could you maybe explain some home-style methods of shaping and slotting a nut on a guitar. It would be very helpful. Thank you very much.

-=Stale=-

I'm actually in the process of making a video about how we do that. It's pretty basic stuff. We rough shape the blank and put marking slots in with a small saw. Then we use a fixture to determine the overall height of the nut by measuring the difference between the nut platform and the top of the first fret.

We then sand the bottom of the nut down until the entire piece is the correct height, then we glue it down. Next we use files and sandpaper to bring the ends flush with the neck and shape the front of the nut.

It's a lot easier to watch the video, so keep you eyes on the Workshop Blog at: Guitar Designer's Workshop.

[blindedbysilence]

Re: LIVE NOW - Guest Luthier Series Feature's Hamer's Jol Dantzig

What guitar do you consider to be your #1? The one you reach for whenever you feel the need to play. Could you explain what makes you gravitate towards that particular one? Pic perhaps?

[Jol Dantzig]

Re: LIVE NOW - Guest Luthier Series Feature's Hamer's Jol Dantzig

What changes have you noticed since FMIC bought out Kaman?

We get Fender shirts at employee pricing.

For the most part Fender has only added to our resource base with interaction from people who really know their stuff.

Actually, I've known so many of the Fender people from years and years in the industry that when I go to the custom shop, walk in the factory or even go to the NAMM show, it's like old home week. The biggest change for me is that now I'm not a "visitor".

Inside Hamer, there hasn't been any change, we're still doing things the way we do them and if anything, people are curious about what we do. They realize that there's always something to learn.

[Jol Dantzig]

Re: LIVE NOW - Guest Luthier Series Feature's Hamer's Jol Dantzig

Jol,

I'd known about Hamers for years, but my introduction was in 01 (9/11 related, long story). Picked up a used Special FM which played and sounded like nothing I'd ever touched before. Have been hooked since. Custom ordered my main player in 04; Studio Custom (bound and victoried), all korina, chambered.

A couple of Qs. Have you have thought of making a slightly smaller version of the Standard on a regular basis? Just love the shape, sound, and comfort, but having the frets near the nut closer in would be a world of difference. Yeah, retooling is expensive, but had to ask, lol.

Also, ever thought of reviving something else in the flat-top vein? Not a redo of the Eclipse, Firebird, TLE, Special, etc, but a new twist. Sonically, there is just something about a flat slab that is different (and appealing).

Hi Gearhead, that's an interesting idea. I know what you mean about the way the neck sticks out to the left and you really have to reach for that first position. I don't think that the problem gets solved by making the body smaller though. The point at which the neck and body meet would still be about the same relative to the strap button position. On the other hand, if you were to set the neck into the body further your goal would be achieved. Of course part of the beauty of the design is the access to the high frets (for those who are not interested in making any money playing guitar).

[Jol Dantzig]

Re: LIVE NOW - Guest Luthier Series Feature's Hamer's Jol Dantzig

I say you take their complaints and make one GIANT boomerang inlay that goes from the first to the last fret.

Now THAT's my kind of solution!

[StalePretzel]

Re: LIVE NOW - Guest Luthier Series Feature's Hamer's Jol Dantzig

I say you take their complaints and make one GIANT boomerang inlay that goes from the first to the last fret.

[BloodRose]

Re: LIVE NOW - Guest Luthier Series Feature's Hamer's Jol Dantzig

Jol,

Here's a reason to build the Cali again



Now what about those Boomers!

OMG That is AMAZING!!!!


Thanks for sharing the pics Jol! So were you resposible for Rick Nielsons checker board fetish??

Evan and the Duncan family, This has been an event of a lifetime! Thank you !!

Good questions Bros and Sis'! Many asked what didnt think to..

[Devnor]

Re: LIVE NOW - Guest Luthier Series Feature's Hamer's Jol Dantzig

Plenty more where that came from Jol. We want Boomers and across the frets please. Would look silly any other way. You didnt answer the question but I think you heard me! Thanks!