Recent content by 925SS

25.5 scale, 22 frets, loaded with fender tuners, & roller string trees, includes mounting plate & screws. Canadian hard maple with rosewood fret board. Nice fretwork $75 PP/shipped CONUS only please

Re: Whose broken a regular spaced Dimarzio? A couple yrs ago, I had one of the winders at MLP wind me up a coil to fix my super d, since then the other coil is shot. I didn't have the original bobbin, so he wound it up on a 49.2 bobbin (slightly wider than Dim) I'll sell you the coil, with hex...

Have to move some things to justify the purchasing of more stuff (you know the story):scratchch First up, All Parts licensed fender neck. Got this one a while back from a c'list deal. The previous owner had drilled thru the fret board while attempting to mount the neck. I drilled & installed...

The bridge is a replacement from all parts, I think, the loaded pickguard came from a 2013 mim strat, the neck is a licenced all parts fender replacement that I installed a graph tech nut on, so why the bad align? Plays fine & sounds pretty good, just looks funny, what am I missing here? The EA...

Got these for my SG standard, but, as you probably guessed, neck dive was toooo much. First pic has a nice view of my fingerprint, will be wiped, & carefully packed $45 pp/ship

Duncan sh-5 dbl blk w/logo 12+ in of lead, good condition $55 PP/ship Prefer to trade. I need a bright neck pup. A Dimarzio humbucker from hell would be great, or maybe a Full Shred neck reg spaced

Up until here recently, I'd been using my pod xt for recording clips & noodlings, nothing serious. A week ago, we had a lightening storm. I think it fried my pod, cause it comes on, but does nothing anymore. Since I don't have a great need of expensive recording gear, I was wondering what other...

I'm going to convert my partscaster from sss to 2 HBs. The switch is Asian, all poles in a line. What I'd like to do is this. 1=Neck 2=neck split 3=neck & bridge 4=neck & bridge split to make a HB, north bridge/south neck, or opposite 5=Bridge All the diagrams I find, the switch has poles on...

Got a few things on the cleanout table Boss BD-2 near mint w/box/paperwork...$60 pp'd/shipped...SOLD Joyo ultimate drive mint w/box/paperwork...$40 pp'd, shipped DOD Supra Dist FX-55B good shape, pots a little scratchy (easy fix) w/box...$35 pp'd/shipped Artec bridge pup thick c mag full...

Mean 90, & Dream 90. Both in like new condition. Both have full factory leads $35 each, PPd & shipped, or $65 for the pair. CONUS only please

Needing pups for my SG I have a Kahler American Flyer trem with locking nut & arm I want to trade CONUS only please

Re: Where's a good place to buy a PINE Tele body? One of my favorite guitars. Built from a piece of old growth yellow pine that was 2in thich x 15 in wide. I added the birch ply to the top to "pretty it up" GFS mean 90 bridge, & a middle strat pup. Not your traditional tele, but this b***h rocks:D

$60 +ship PP prefered US only Would trade for a decent EQ pedal

OK. A clip is worth a thousand words, so I thought i'd post one. This is what i'm dealing with on the neck pup for my prs style, all maple, hollowed out body, 24 3/4 scale with hog/rswd neck. every set i've tried is coming out pretty close to this. This is the DM 36th paf set. As with the...

I recently finished (kinda) my PRS style all maple body build. Under the impression that maple is a very bright wood, I expected to be fighting to tone it down some...NOT THE CASE. I have a set of MHD custom pups that I bought for my all mahogany LP. For giggles, I tried them in the build, while...