Recent content by Bfeeney

Hi everyone. I just got myself a Joyo Tweedy because I was looking for a tweed sounding amp and saw these cheap things get good reviews. I have a cabinet that has two Warehouse Guitar Speakers G8C and two G12Q in it (16ohm) that I've used for years with a Blackstar HT5 on top. Zero problems. I...

Thanks for the replies. I drew a quick picture to show you what I'm thinking. Only one amp will be on at a time with this passive setup

Hi everyone. I have a question about hooking up multiple amp heads. I have a Blackstar HT5 on a 4x12 now but I want to try others like a DIY Mojotone 5E3 kit, a Joyo amp and my work buddy has said he might give me his Vox Night Train. I'm going to get another 4x12, so I'll have two separate...

I had a question about the multiple EQ's I have in my circuit and how to set them. I have the 3-band on my amp, DS-1 tone control, Behringer Ultra Metal with a 4-band and a Zoom G3n. After using an EQ pedal on the G3n I decided I should get an actual EQ pedal and put it in the effects loop...

Two AHB-1b (bridge) Blackout pickups for sale. Both work great, I just wanted to go back to 81's. Full leads, have not been cut. Comes with two 25k alpha pots, stereo jack, battery clip and cap for tone. No mount rings or springs included. $90 shipped.

I found a site that had instructions for a diy passive attenuator for an amp, so I built one. It works pretty good so far. It has a 'bright' switch which helps when the thing is turn down to <3. The directions said to get a pot that matched the speaker ohms. I'm running a 16ohm cabinet, so I got...

Two bridge Blackouts with height screws, two 25k pots, jack, battery clip. I thought I had a tone capacitor but I don't since I ran 2 volumes. Both work just fine, and look new. I got these so I could have a Blackout guitar and an 81 guitar, but to me they're close enough that I don't need both...

I have a speaker I found laying around that says it's 16ohm but it reads 12.2ohm, is it close enough?

If anyone has one (or two) 81's or H4's (not H4a's) let me know. If you don't have the pots it's fine I have a whole box of them but the quick connect wire to the pup would be nice.

GFS Pro bridge- $15 shipped. 11" wire, 2 wire. A2. UNPOTTED. 7.76k actual reading. I put heat shrink on the wire because the exposed ground kept touching positives. Pickup sounds great, getting rid of it because I got the Classic II's so I can coil split. GFS Pro neck- $15 shipped. 13" wire, 2...

I got a couple Detonators for Christmas and was wanting to change out the large hex screws for something with a smaller head to change the magnet field. I Googled it and the only thread size I found was 10-32. I then took one of the screws to Ace and tried to match it up with another 10-32 but...

Re: Marble paint design Here's the blue one. Like I said, you have to see it in the sun.

Re: Marble paint design Thanks Mav Here it is with the black hardware and a temporary set of pickups

I was bored one day so I decided to paint one of my guitars...

Just got this in the mail today. I love Les Pauls, the look and feel is just awesome. I've had a few in the past and loved playing them except none of the pickups I put in it sounded good. After several pickup swaps I realized it wasn't the pickups I didn't like, it was the mahogany. This was...