Recent content by blackw1re

It does work, it just sounds very dark. I used this wiring diagram as a starting point for how to hook up the individual pickup wires: Except that I have two Volume pots and one master tone now. I used a .022 uF on the tone pot because I've read that they have less of a high-cut, which is...

No, I do not have Treble Bleeds installed. The thing is that the guitar sounds to dark to me with both volumes and the tone on 10. Strangely, when I turn down the volume just a tiny bit, the overwhelming bass gets quiter first and the highs actually stay almost same. I'll try to attach the...

Hello y'all, I got my guitar hooked up with a pair of P-Rails using two 500K log Push/Pulls for Series/Rail/P90/Parallel mode as Volume pots. I use a 500K log pot with currently a .022 uF / 22 nF for tone control. Now the overall sound of this combo is very dark and especially in Series and P90...

Hello dear forum members, Some time ago I bought a set of P-Rails, which I've soldered into my Yamaha Pacifica using two Push-Pulls based on the wiring diagram from the SD website: https://www.seymourduncan.com/images/wiring-diagrams/2PRail_3G_1VppSPL_1TppSPL.jpg I followed the diagram and...

Hello and happy new year to you all, I recently bought a SD Hot Rodded Humbucker Set with an SH2 as neck and a SH4 JB as bridge Humbucker. I am planning to put them in a currently unused Yamaha PAC body I have lying around. As I am a huge fan of versatile wirings, I also ordered a pair of...

Hello all, I got a strange wiring issue with me newly installed P-Rails. I've taken a Yamaha PAC120H and put in a Set of P-Rails. I've not used the triple shot system, but two push/pull pots, one for volume and one for tone. I've used this wiring diagramm with exact same specs on the pots and...