Recent content by Bobisadrummer

I have a guitar, which currently has custom shop SH-5 that has A8 magnet and dual hex poles in the bridge and it's killer. Currently, it's hooked up to a dual concentric pot with a Kinman style treble bleed, although I can't recall the value of resistor I went with. But anyways, I don't really...

I have one of those Blacktop Baritone Tele's that Fender made for a little while (the ones with the bridge not placed properly resulting in intonation issues on the sixth string) Considering the only thing I love more about guitars, than playing them, is modding them, I've decided to nix the...

I have one of those HTT (Two tele neck pups in middle and neck positions) that I'd like to change to a HT (TB-5 Custom in the bridge and Area T in the neck) set up with 3 way switch, 1 volume (with a treble bleed) and 1 tone pot. I'd like to wire it up so that the TB-5 sees 500k volume pot and...

So I have a 2011 Satin Charcoal Grey FSR/Blacktop MiM Hardtail Alder Strat w/ Rosewood neck. It came with a H/T/H config. I've decided to turn it into a simple guitar with a single bridge humbucker and 1 volume knob. I figure since it's only going to have one pickup, I might as well make it a...

Hey guys, I've had this pickguard loaded with SCN's and a S1 switch I've been waiting to put in an Aztec Gold Squier Custom Vibe, only problem is, I can't play Strats with the volume knob where they normally are. So I'm trying to remove one of the tone pots and rewire the other to a master tone...

Re: P-Roblems with my P-Rails Here's one version of the diagram I have. Here's another version. Here's some pictures of the wiring, mainly the phase switch on the tone pot. http://imgur.com/a/ZZ3mi Now that won't invert the series/parallel functions right? Series will still be both...

So I installed a set of P-Rails w/ triple shots in my Chapman ML-3 which has 24 frets. I have them flipped so the rails are outward. I have a 4 way blade for series and parallel middle positions. My volume pot is a push/pull pot that when pulled, bypasses both the volume and the tone pot kind of...

So I'm looking to install a set of P-Rails w/ Triple Shots in my Chapman ML-3 Modern. I'll also be swapping the 3-way blade for a 4-way and utilizing the current push/pull tone pot, that came wired as a coil split, for a phase switch which should allow me to do a Jimmy Page wiring set up on a...