Recent content by cohara41

This pickup has stacked HB & a single coil. Does anyone have an experience with this pickup. I tried wiring all three coils in series & had some serious hum that was cancelled when I touched the strings only. I may have wired the single coil in between the stacked HB's. Just looking for the best...

I have a Solton 8x10 Cabinet Mod b-810, Ser#135/83 480 Watts 4ohms. I played bass thru a Peavey MarkIV head. It played at low volume but when I turned it up some POP & no sound. Opened it up & two of the speaker had wires dissconnected. I've re-sodered them & have continuity now. The Peavey is...

I've got one of these. Wiring a HSS Electra. Looking for a wiring diagram with one vol & one tone. I've found a diagram online for 2 tones. Hoping someone has a fix, I'm not having any luck getting it to work. Thanks in advance.

I see that classicals don't have the angle with the base E being the longest and the high E being the shortest like on a steel string. Would it be OK to reglue it this ay or is there a reason classicals have a straight bridge? I'm sure someone here has the answer. Thanks.

Bought a Epiphone neck that seems to have pretty severe bow back. Any ideas on how to undue the bow. I'm going to clamp it to a straight surface for now. Will heat help. Anybody here had to fix this problem?

Got a couple of these in my parts drawer. I'm putting together a strat partscaster. Walnut body with maple cap. JB in the bridge, Custom in the neck & a SD singlecoil in the middle ( can't say which one now). I always here of people using 250K or 500K. Can these 100K's be used & if so what size...

Bought a bunch of parts for cheap & one HB is missing a screw bobbin. Any idea how to fix this? Purchase a screw from a hardware store? Should I epoxy it in? It looks a little chewed up in there. Anyone ever run across this problem? Thanks in advance.

http://phoenix.craigslist.org/wvl/msg/4426395413.html Looking for opinions on this. If it's a worthwhile thing to get into & whatnot. Maybe someone that has done something similar having converted one of these for guitar. Ect. Thanks for looking.

Took my Hot Rails clone out of my Tele to put in the bridge pos of a strat with a vintage rails middle & cool rails neck & it sounded very weak. Took it out & one coil is shorted. It was a tight fit but it was wrapped well. Occasionally with manipulation the coil will read 6 ohms like the other...

Peavey mark IIi Bass Head 400 watts & matching 1 x 15 cab. &75.00 on half price day. Kid working there tol me it had only been on the floor an hour. Pure luck but I stop at them all alot best way to increase your chances. Happy hunting.

Here's a few pictures & I'll be back with a sound report...Cheers

Does anyone know anything about these. Got it cheap at Goodwill with case. This one is duo six string necks both HH. Made out of a hard red rubber like body. Just wondering what it might be worth or where I can find some info on this thing. Just gotta plug it in & see how it sounds. Thanks in...

Hey Folks, Wiring a Jackson Peformer ($35 Goodwill score). HSH, SD 59 in the neck, Jackson SC, SD Dimebag at the bridge. I'm phase switching the Jackson with a DPDT & dropping out one coil of the Dimebag with a SPST. I need a way to have series for neck & middle & bridge & middle but not neck &...

Got this metal lookin' Jackson Performer at Goodwill $35 missing the HB's, the high E tuner broke off. I got another & drilled out a hole on the other side & move the strings down one: EZ Fix. The middle single was left in. It's got 25K pots, that what it says, not 250K?? Will these two HB's go...

For some reason my DOD Sustain 515A gives almost no outout. When I crank the amp with high gain you can hear a litle output. If anyone has any experience with this type of problem & can guide me thru troublshooting I'd be thankful for the help or guide me to the help. I know how to use a...