Recent content by cragga

Hi Okay good folks, I need a diagram for three Humbuckers where I can dial in the middle pickup, sacrificing a tone pot, in order to get the following: 1 - bridge/middle 2 - bridge/middle/neck 3 - middle/neck And when the middle volume is turned down you get: 1 - bridge 2 - bridge / neck 3...

Re: 1 Humbucker splitting options Hi GuitarDoc Could you just have a good check of the new amended diagram for me? Just checking a few things: 1. Will the humbucker definitely be in series when the spin-a-split is at 10, no matter which coil is selected? 2. Have I indicated that the white...

Re: 1 Humbucker splitting options Hi GuitarDoc I've drawn up a diagram as mentioned yesterday. A bit unsure of some wires and where they go so if you could have a look I'd be eternally grateful.

Hi Is it possible to have 2 spin a split pots and 1 volume pot in a one humbucker 4 wire guitar. Therefore, one pot blends out one coil and the other pot blends out the other coil? Or using a dual stacked pot - middle is series then either side of the pan/blend is each coil? Cheers

Hi I have a one pickup (Iron Gear blues engine) 4 wire in the bridge of my les Paul junior. I was wondering if any of the three options below were possible to actually do? Option 1: 1 volume 1 tone 1 bourns style blend pot : middle/detent - series, blend left - north coil, blend right - south...

Hi I had a previous post that was similar to this but I have had a change of heart in what I want. Basically I have a TB5 in my tele bridge with a 3 way toggle. Down - series, middle - Screw pole (outer) single, top - parallel. What I want is bottom - series, middle - screw pole single...

Hi Firstly, thanks to everyone who helped out with my 500T pickup match question. I have gone with the a SD Jazz for the neck. What I'm doing now is having 2 Alpha 500K log push/push pots for the tone pots to split the 500T in the bridge and the Jazz in the neck. I will be following the...

Hi I have a set of alnico pro IIs on my MIJ epi les Paul custom. A fantastic guitar which I'd put up against a US Gibson. However I'd like to put a four wire Gibson 500T in the bridge. Not everyones favourite pickup but l like it. I'm told that the alnico neck will be noticeably quieter...

Hi This is my first post, so here goes... I have a 95 US Tele that I have fitted a TB5 Custom to the bridge, enabling me to get series/split/parallel sounds with the aid of a mini toggle inbetween the volume and tone controls. I had it wired by a tech, as these were the days before I dared to...