Recent content by daemon barbeque

  1. daemon barbeque

    Alien Demons Don't Fly UFOs

    Yes, this thing is still in progress and only half of it is done. Please tell me what you think about it or what kind of feeling it gives to you. I put lot's of attention to the stereo effect. All critiques are welcome! Ah, and it is a rather UNUSUAL style for me. Cheers...
  2. daemon barbeque

    Thank you Evan and Frank

    And of course Mr. Duncan for the 7 string Full Shred. Many people couldn't afford it and went with BKP Miracle Mans. And of course thank you for the 7 string single coils, although I am not going to buy one. A 7 string FS is a dream, and it would be even better in Neon Red :ban: Anyway, thank...
  3. daemon barbeque

    My Custom 1 piece 8 string multiscale guitar get's scalloped board

    and the neck is allmost done Pics:
  4. daemon barbeque

    So my Custom 8 string multiscale custom kelly becomes real

    And it looks already nice. Check!!!
  5. daemon barbeque

    Tataaaa. Mesa Mark V is here !

    And it's under 2000$ WOOT! http://www.mesaboogie.com/Product_Info/Mark_Series/mark5/mark5.html
  6. daemon barbeque

    I refinished my RG (please wear sunglasses)

    After Rid asked me what "crazy" we should do to our guitars ,Some crazy stuff popped to my mind. I stripped the body ,Rounded the edges ,carved the lower horn inside for better fret acsess ,filled the Neck PU hole ,tone pot hole and the switch hole.I also filled the body with epoxy-resin...To...
  7. daemon barbeque

    Russian Big Muff price explosion on Ebay..over 200$

    WTF? people are selling those russian cheap butted pedals over 200$!!! How come to that? Is there anything special ,resistors ,ICs whatever?
  8. daemon barbeque

    Alternative tubes for the JCM 900

    My bandmate uses a JCM 900 ,and it has 5881s in it...Time for some new tubes and we wanted to experiment. Do you guys have experience with different tubes in 900s?
  9. daemon barbeque

    So I scalloped my RG 1527

    It was a PITA job ,since i didn't have any good machines ,and most of the work was made with sanding paper.It took me 12 hours to finish ,and it still has some spots to smoothen out... But I got my custom strings and didn't have the patience to work with sand paper with my hurting/burning...
  10. daemon barbeque

    New song!!!Finally recorded Smaragd!

    Yay ,i finally managed to have 2 days for record this song as i wished. Addictive drumms where PITA ,but it sounds okay The guitar is Ibanez RG 1527 with Q-Tuner GL-7 SHZ in the Bridge.I don't use Neck PUs... Direct tone-port...Nuendo etc... And yeah that's my voice thru Whammy :D..Was fun to...
  11. daemon barbeque

    Two new short Q-Tuner clips

    Yeah I give this puppy a new test ride today.Not bad at all. First the guitar only heavy riffage from my song Chase. http://www.soundclick.com/bands/default.cfm?bandID=493381&content=songinfo&songID=6619195 And the Clean clip...
  12. daemon barbeque

    Ban-kai 1/3 demo

    Well i got a new PU..Q-tuner suoer high Z 7 string PU. And this is my test clip. Drumms are poor and my playing is sloppy.Bear with me.. Cheers! http://www.soundclick.com/bands/page_songInfo.cfm?bandID=493381&songID=6616355
  13. daemon barbeque

    Reflex PU Scematics

    Yeah my Bandmate has some old Reflex PU's.The Preamp has 7 wires and we don't know how to connect it in 1 HB config.Any help?
  14. daemon barbeque

    My Valvetronix AD 50 died..Schematics needed.

    Allmost... It farts without end ,it has too much his... A friend of mine want to take a look at it..How could i find the Schematics for it?
  15. daemon barbeque

    strange bbq jam track

    Inhale... https://forum.seymourduncan.com/showthread.php?p=1635168#post1635168
Back
Top