Recent content by doodie

I was doing routine pickup swap, took out an invader set(Work fine before swap) measure their dc resistance. The bridge was okay(16.86k) but the neck didn't get any reading. :sad: I did 3 things 1. Adjust pole piece to see if I'll get a reading and nothing. 2. I unsolder R&G wire to get an...

I was hunting used pup from ebay and I saw broken pup time to time with half of normal ohm reading or sometime one coil with will have normal reading while the other with less than half of the other coil. And all of them are made in less than 10 years. So my guess is someone did something stupid...

I'm planning to install a set of new SD into a Strat with a chromed metal pickguard but before I do that just curious does metal pickguard be messing with the operation of the pickups? does the metal pickguards change the tone? will it kill the pickup in time(losing charges)? I currently have...

I followed the soldering diagram from the SD site but it doesnt seems to work... can the expert here please take a look at my wiring and tell me whats wrong with it? I'm just doing the simple 2HB 1v 1t 3way switch...

I'm going to do my first Push/Pull wiring but is puzzled from the SD's wiring diagram. Can someone here please explain to me what does it do? First, with 1 volume PP and 1 tone http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=2h_1v_1t_3w_1pp I know this one does...

I'm building my HH tele with SD PU, just wondering for the bridge humbucker should I order normal spacing humbucker or trembucker? because this is my first tele and I havent order all the hardware yet hence I cant do the measurement myself. So, can someone please help me out here? which...