Recent content by Dreadneck

Re: Studiomaster Valve Leadmaster violated!! I'll try again.

Re: Studiomaster Valve Leadmaster violated!! So here I took a photo of the underside. Green lines = Resistors Blue lines = Caps Purple line = Fuse The colors represents the diodes and the color of the wires that comes from the PT. The current goes from positive to negative right? I just...

Re: Studiomaster Valve Leadmaster violated!! The green wires goes to chassi ground, so I believe they are correct. No the burnt resistors feels wrong. To me it looks like they where creating a loop of sorts that should'nt exist. The two pins goes to the power transformer, so heaters seems...

Re: Studiomaster Valve Leadmaster violated!! Thank you!!! You are a God send! So the idle should be -91V if I get it correct? What would that translate to in amps? I've heard that everything between 30mA to 40mA is in the spot for 6L6's. There should be a resistor in parallel to both filter...

Hi folks! So I have some issues with my old but recently aquired Studiomaster amp. It came to me in an absolute TERRIBLE shape to say the least! If anyone out there could help me out here I would be very very grateful! The questions I encountered while working on the amp was the following...

Hi! I have major issues with figuring this switch out It's from a Series 10 guitar and sadly I do not remember how it was wired before.. Anyone seen this type before? How is it supposed to be wired?