ehdwuld's latest activity

  • ehdwuld
    ehdwuld replied to the thread Bawls Deep Bass.
    I just got the Eminence Hempdog and Eminence EM12 Basically the EVM12L copies from Eminence The Hempdog is just a Hemp cone on an...
  • ehdwuld
    ehdwuld reacted to uOpt's post in the thread Question about shielding with Like Like.
    You need to connect all the shields to ground, otherwise you make things worse.
  • ehdwuld
    ehdwuld replied to the thread Question about shielding.
    This is the antenna thing I was talking about
  • ehdwuld
    ehdwuld replied to the thread Uneven Bass Volume.
    Tell him to remove everything all 5 and boil them for about 10 mins That should remove the finger gunk from the four and level out the...
  • ehdwuld
    ehdwuld replied to the thread Uneven Bass Volume.
    He said it's newer than the others Thats probably the issue You know how zingy new strings are Thats probably what it is The other 4...
  • ehdwuld
    ehdwuld replied to the thread Question about shielding.
    Most issues I have had with shielding, is the connection to ground If you don't have some continuity to ground for the pickguard to...
  • ehdwuld
    ehdwuld reacted to Chistopher's post in the thread Uneven Bass Volume with Like Like.
    5 string bass is tuned BEADG Unless the string is the same brand and construction as the other 4, the problem is almost definitely the...
  • ehdwuld
    ehdwuld replied to the thread Uneven Bass Volume.
    New string with older dead strings full of finger gunk Yep there's the issue Bass players are notorious for not changing their strings...
  • ehdwuld
    ehdwuld replied to the thread Uneven Bass Volume.
    Oh are we just pointing at stuff that we don't understand? How would the nut cause it to be louder? Maybe it is rattling on the saddle...
  • ehdwuld
    ehdwuld replied to the thread Uneven Bass Volume.
    Wait what? Unplugged they are the same volume Correct Thats acoustic in the room right. Height over the pickup makes no difference at...
  • ehdwuld
    Roller saddles Just dropping this here Carry on
  • ehdwuld
    Well, I've been absent around here for a while, but I took delivery of this amazing bass in December of 2023. This is easily the most...
  • ehdwuld
    Leave out some of the screws on the bottom of the pickguard Add two wires from the volume pot Hang them outside the pickguard...
  • ehdwuld
    ehdwuld replied to the thread INCOMING!!!!!.
    I believe that's be Daryl's House
  • ehdwuld
    Mini switch with a 500 k resistor Across the the outside lugs of the volume pot
Back
Top