ehdwuld's latest activity

Shaping the back of a neck is easy, I've done it. Like Jeremy said, go slow and take off a little less than you think you need each...

I have a tin of tung oil from other projects Two thin coats should do it I think I can refinish the headstock and heel as well Is...

Yes that definitely possible. I did it several times. Do some measurement of you fave necks and compare them with the IYV. In my case...

Mmmm yeah didn't think about the taper I think it is just a fat D shape I th I believe I can just flatten the back to bring it down...

I would think any ferrous material between the magnet and touching the poles should work I'm measuring coat hanger wire now Edit: My...

In the spec on the page, It says it's for tablets and smartphones 200 watt Should hold up I use bass and PA speakers for guitar

That is exactly opposite of your original post

I think @Securb has one

On my White MaxCheer half rails I swapped the ceramic magnets for alnico 2 in the neck and alnico 5 in the bridge These alnico magnets...

So on my New IYV strat style guitar The neck is a bit chunky It has the 42 mm nut and the 12 inch radius I like I was going to order...

Ahh the Wheelhouse Thats what you want https://amzn.to/4akUeSK

https://amzn.to/4tmGIqx I found the 10 inch version with neo and cannabis cone

https://amzn.to/3O1a1yF The BN12 Its Celestian and Neo But not Hemp https://amzn.to/4kq0hKn The Delta-Pro-12A is again close to the...

I just got the Eminence Hempdog and Eminence EM12 Basically the EVM12L copies from Eminence The Hempdog is just a Hemp cone on an...

You need to connect all the shields to ground, otherwise you make things worse.