ehdwuld's latest activity

Clear packing tape Laser printer your logo on plain copy paper not inkjet... that's a different technique Once printed press clear...

That's badass. Is that a decal? How did you do that?

Wilkinsons are fantastic. I also really like the Vega Trem, though that is probably more expensive. As far as the sag on the nut, it was...

Alright. That bridge was a bit complicated Remember to not lock the saddles until after you set the intonation The lock wont let the...

Love those Can we see the Back ?

My Indo Ibanez Saber Premium with a Dmz Tone Zone bridge pup, True Velvet single coil in the middle & Air Norton in the neck...it has a...

Ok bridge Had to whittle out a bit for the bigger brass block Opened the upper side and removed the shelf formed when they glued on...

That may be why some manufacturer use a strip of something else in between the bookmatch

I used a jointer. I did get to use the wood to test my first ever stomach bevel: Started with belt sander, finished with orbital

My fret board is a 12 So I may not notice any sag

Yeah, they are supposed to go on the outside of the screws. But on one, there was a weird 'sag' in the middle of the nut- I threw a shim...

I noticed there were three thick ones and three thinner ones And if placed outside the screws they had a much greater impact on thw...

It took me quite a bit trial and error to figure out the shims...first, I didn't realize they were different sizes. Once I figured that...

I worked as an electrician for a couple of decades They have leads with clips on them Meter leads on Amazon

On another note about the LSR nut You know when you are tuning your strings and you always drop the pitch below the note and crank up...