Recent content by fender_mod

okay so I have 2 SD QP single coils for bass that I want to put into a big ol' humbucker. I've tried wiring end to ends. right now I have them ground/ground but its out of phase and I think I've also tried it hot/hot with the same bad results. can I put them into a hum-cancelling humbucker...

i wired my p/ups with individual vol/tone on stacked 500k/500k pots and a 1 meg resistor. i figured i would go 1 meg cuz the 500k pots would have more treble i would need to roll off if necessary. but its like my tone pot only has full blast treble or no tone and my volume just has full on or no...

okay so my next electronics upgrade will feature my 3 pup pbass with a seies/parallel switch in addition to a 3 way on/off/on selector switch, already installed w/no problems, to select between having the neck on, bridge on, or neither on. the traditional p pup will always be on and is not...

this shows how i have my bass currently wired; i know how to reverse phase but not put the pups into series. i think i need to reverse phase on the neck pup because it is thin and weak when the neck is on full blast. my j pup can get drowned out too but is still much stronger and clearer than...

hey guys, a friend of mine recommended this forum cuz he said you guys are the best so i need some help figuring out a particular wiring scheme for my customized fender p bass. to start its got a dimarzio p+j pickup set up on it and i wanted to go further and add a duncan quarter pound single...