Recent content by Flashdogger

Let me know if this works

Hopefully you can see what's going on in these pics I may have to pull it apart .I'll have to pull it apart to change what ever anyways. Also if ld like to yours the master tone pull pot to split a coil. In the diagram I followed both red and white are taped together. As far as my problem with...

Sure ,can I do it tomorrow.its all back together and Ive been working on it all day. Ill open it up tomorrow and post some pics.thanks for responding

So I got it together and I have some questions.first all 4 pickups are on at the same time in all 4 positions and they all sound the same .aren't they supposed to switch combinations? Also I noticed that I can't turn either one of my pickups all the way down . If I do I get know sound. I thought...

Quick question.i don't see a ground on the switch either. I have it wired up but I'm hesitant to put it together without a ground on the selector switch.should it be grounded and if so where

So just wire it together with the white. Also any chance you can find the same thing with the push pull or doesn't it make sense with the 5 blade selector?

On both

Black Red Green and bare

There is also a red wire on the neck pickup

You got it

So I have a Mitchell MD400 .I decided I'd change the output jack do to some noise and cut outs.i figured while doing this I would put some quality pickups in as well .I chose the semour Duncan shr-1 hot rails for strat ,for the neck because they measured up and they sounded like something is...