Recent content by Funkyard

I have a Duncan Little 59 in the Bridge and a 59 in the neck with 2 CTS push pull pots for series parallel. I used a guitar electronics wiring diagram but when done all sorts of issues inc grounding, grounding cutting out everything, pickups would work if grounding with fingers but still...

As the title says my tele has a little 59 in the bridge & 59 SH1 neck i would like to wire both to one push pull tone pot for series parallel use but cannot find any diagrams? Thanks!

Are the Antiquity Mini II for tele neck meant to go with 250K pots? Thanks

I have a Dimarzio Area T neck in my tele which I like, but looking for a little fuller sound but similar clarity would the Jazz be similar?

Im trying to figure out how to wire the little 59 in my tele for Series/Parallel using CTS push pull pot. I would use Parallel more than Series so parallel in the down position. I use a Switchcraft 3 way toggle. Currently its also wired backwards (green to positive, black to ground) due to...

At the moment my tele has a 3 way toggle and regular CTS 250k pots If I don't want to tap the pickup can you just connect the full output lead or how would it be done then have the availability to tap latter? thanks!

I purchased a Limited Edition Fender American Standard HH Tele, nice guitar but the bridge Fender CS twin blade PU is to bright for my taste. I was looking at 59 but the SH4 bridge appears to be more balanced? Your comments or any other suggestions are appreciated thanks!

I have Road Worn Tele player with a Duncah Little59 in the bridge and SH 3 jazz neck I have a DPDT mini I was just going to use on the SH2 for either Split or Paralell then started reading about 5 way switch /4 way switch. push pull pot, maybe adding a strat center pickup, looking to maybe...

I have a fat tele wlLittle 59 bridge & SH2 jazz neck I would like to add a mini toggle for the SH 2 to go from series to parallel. All I see are Series, Split & Parallel switches do they a make a 2 position series to parallel switch?

I play Blues, Funk, R&R & Soul, been playing a Road Worn Player Tele for the last 5 years with the original 59 Humbucker in the neck and a STL-2 Hot Tele Lead bridge that replaced the original Tex Mex. I want to try a hum cancelling bridge P/U. I did try a Vintage Stack but not enough output...