Recent content by GalliaEst

So I had a Lace Sensor Blue in the neck position wired directly to my output jack once, and it sustained like crazy. When I installed pots and a bridge pickup, I've got a little bit of buzzing and I noticed much less sustain. Could this be the culprit?

3 Pickups, 3 on/off switches, master volume, 2 tones. I want the neck and middle to share tone #1 and the bridge to use tone #2. Do I send leads from the middle lugs on the neck + mid switch to tone #1? Or do I send a lead from the neck switch to the middle switch and then on to tone #1? Am I...

When working with two ON/ON SPDT miniswitches as pickup selectors, is this correct wiring? Or should I ground each switch to the switch itself? I don't remember how the guitar was originally wired, I just remember that the switches were grounded to themselves, but what I drew in the attached...

Sounds amazing in my Charvel Model 6. I gutted this guitar because when I got it someone had messed with the wiring so much that I couldn't resist tearing it all out and rewiring it. I never finished because it was a PITA and I didn't like them original electronics much anyway. I soldered a...

I have a Lace Sensor pickup I want to install in the neck position of my Charvel Model 6, but the cavities are way too deep. So deep that with the screws attached to the pickup, holding the pickup to where it should be, the ends of the screws are just touching the cavity. And that's using the...