Recent content by Galva

I am planning on rewiring my Chapman MLB1 FF DH and as it has 3 knobs I wanted to add some more functionality to it. After I drew the following diagram I realized something: If I have the blend pot and the Series/Parallel switch, will the blend pot in series mode simply work like a volume pot...

Re: Blend pot with push/pull Thank you very much for searching, the Fralin one is completely new to me, and looks just right! I have made a mock-up of the phase wiring, but do you know how the remaining wires have to be connected to get the regular blending between the two pickups?

I was wondering if it is possible to use a stacked potentiometer as a blend pot for two humbuckers. Furthermore I have found one that has a push/pull switch, which could be used for example to do phase wiring: Does anyone know if such a pot can be used for blending? The reverb listing calls it...

Re: 3 Humbucker diagram I have now tried to replicate the diagram as follows: (these are the neck, middle and bridge pickups respectively, with their volume pots and one master tone, with .022uF and .047uF) Would this result in the desired positions? Could anyone explain to me what...

I am planning on doing a 3 Humbucker build and was searching for a diagram to use, when I found the following post, last updated in 2010: In answer #8 it says that a guest is using Does anyone know where to find this diagram? The link to the image is unfortunately not working anymore. Thanks...

Re: P-Rail Les Paul wiring question I have finally finished the wiring according to the diagram below, including the triple shots and the P-Rails. The problem is that I do not really know how the triple shots affect the P-Rails, I mean I know the four possibilites per pickup but I do not know...

Re: P-Rail Les Paul wiring question Thank you Chistopher for your explanation, it helped quite a bit :) Regarding the Triple Shot rings,I have found the wiring diagram below, would the phase and parallel switch function still work when P-Rails are used instead of "regular" humbuckers? Thank...

Re: P-Rail Les Paul wiring question Alright I understand, thank you for your explanation :) But I have another question, please excuse my ignorance. In the diagram, why is one leg bent onto the housing for the volume pots but not for the tone pots? (The blue arrows) And does the connection...

Hello everyone, this is my first post in this forum and I have a question regarding P-rails. I am planning to install a set of them in a Les Paul with 2 volume and 2 tone knobs and a 3-way toggle switch. I have found the wiring diagram below on the Seymour Duncan website and there are two...