Recent content by house

Hello out there. I have a mod question about the MRX M-68 Uni-Vibe. I have it's predecessor the UV-1SC which has a MIX knob to bring the dry into the wet. It works beautiful IMO, because you can add in subtle amounts of modulation or go for that "Machine Gun" phasing. On the new M-68 model it...

I did a conversion on a Fender Black Top that I had laying around. Pulled out the old pick guard out with everything intact, and did a whole new pick guard. I have an SSH setup, with APS-1's in the neck, and middle, and a Phat Cat (Neck) in the bridge. I was a little leery on the phat cat, and...

Hello out there in Duncan land. I have read numerous of folks swapping the mag in humbucker PU's, but nothing about SC's. I have six A5 poles which I pulled out of an old Fender Vintage Noiseless bridge PU. The PU went, microphonic, on me, and I decided to scavenge the poles once I found out the...

Hey out there. I have 3 Black Fender Vintage noiseless bridge Pick Covers, brand new, which I have no need for. Willing to get ride of for Sh!+ and giggles. Hit me up if you're in need of. My bridge PU went micro-phonic on me, and I have no use for them. Be advised; the vintage noiseless...

Hello out there in Duncan Land. I just put a set of Antiquity Texas Hot (N/M/B) in my Strat. IMHO they sound like APS-1's with a little less sizzle. Can anyone give me some background info, first hand, with any difference between the Ant. Surf PU, vs the Texas Hots. I was hoping the Ant TH's...

Hey Pick-up Bro's, I need some of your expert knowledge in reference to this stock Blacktop N, PU which I'm wanting to install in my Fender Modern Player Tele (Which comes with a mini toggle to split the hummer). I'm not up on Fender's color coding system, so I don't know which wires go were...

Hello out there. I have a question on switching. I have a 5 way switch in my tele. I had 3 pickups, and have since converted it back to a standard tele N/B PU configuration, but I'm not wanting to spend the dough on a 3 way switch at this time. Is there a diagram witch can show me how to get the...

Hello to all. I have installed CTS 250k linear taper potentiometers stated for tone control only, yet after installation, they operate like volume controls. I'm using a .22 cap jumped across both. Can someone please tell me what I'm doing wrong.

Man, after hearing these PU on the SD web site, I knew they would be the first to replace the stock PU in my Blacktop. They look and sound beautiful. Bluesy and jazzy when you want them, and Slash-tastic when you really want to. Once I got my string height and poles dialed in, it was OD heaven.

Hey guys, does anybody have a diagram that using the strat style 3 way switch? The Duncan site is using a toggle switch I think, and I'm not great at transposing one component hookup to another. Thanks in advance...:headbang:

Bros, I'm putting some Alnico II Pro hummers in my Fender Black Top and I want to keep the switching scheme the same as the factory, but I don't know how to wire the Duncan's to the Fender switch. Could someone please help me out with the wiring for this? This switch is crazy!!!

Hey guys I got a slight problem with the switching in my Strat. I'm running HSS with Alnico II Pro's on board. I got APS-1's in n/m and a APH-1 in the bridge. Now all the switch positions are good except for m/b. That position sounds like a robotic duck. I also have a mini toggle for to kick the...

So I got a Black Top Strat on 11/11/11, in black. I played in for about 40 seconds, and then I began it's transformation. BEFORE AFTER BTW,I named him Ace... The neck radius is lower than what I'm used to from a Strat. The pickups are ok, but I have something else in mind. I'm gonna put a...

Hey guys, I got this multimeter and I'm not to keen on how to use, but I need to check a volume pot to see if it's good. Can anyone help me out please? :crying:

I have APS-1 II's in my neck and middle (RW/RP). I cannot find one for the bridge. Do they make one?