Recent content by Jeff5

Hello! I just purchased a used Eclipse EII and am loving the guitar so far. However, I noticed that the newer models, mine is 2015, have a slightly more ergonomic neck joint. I was a bit frustrated by this as I didn't notice it before. I realize that a 22 fret single cut guitar isn't going...

Hey folks. I'm looking for any one of the 3 below at a decent price. Must be 4 conductor and basic black uncovered. PAF Pro Air Norton Liquifire Thanks! Jeff

Hey guys. I just got a BKP Warpig and tested it with my mutimeter and something odd is going on. When I test the Hot (Red) and Ground (Black and Bare for BKP), I get no reading at all on the multimeter. When I test the Hot (Red) and Split Wire (Green and White), I get about 10K which should...

I'm thinking of replacing my Tone Zone with a Breed or AT-1. The guitar is routed for DiMarzio and is very shallow so really only takes their short pole pieces and I want to keep it DiMarzio, at least for now. I realize I don't really love ceramics anymore, and am mainly focusing on hot A5...

Hey guys. I am going to mod my Ibanez with something like this so that I can switch out pick ups easier without tearing up the wood or stripping the holes. I'm having a hard time finding these and I am probably just not calling them the right thing =D. The ones I want are similar to what is...

I'm at a bit of a loss. When trying to screw in a replacement direct mount pick up, it just won't catch in the body. Sometimes one side will, but not the other. I don't think the holes are stripped as I tried screwing the screws in without the pup and they are okay. It is basically a direct...

Hey everyone. Looking to try out these pups in my Ibanez. I need: Short leg 4 conductor Uncovered preferably (not required) 6 String 53mm bridge I'd prefer bridge only but would consider a set if the price is right. For the Warpig, kind of looking for Ceramic but I would try an Alnico...

I went to install a Motor City pick up in my Ibanez and the pick up screw pole pieces are too long. The Ibanez is direct mount so the pick up cavity is fairly shallow. I looked at my Duncan's and they have the same long pole pieces as the MCP. Only the DiMarizio's seem to have the shorter...

I have an Ibanez with an ash body and maple/walnut neck. (This model in white https://ibanez.fandom.com/wiki/RG652AHM) LOVE the guitar. It has the stock Tone Zone and Air Norton and while I like the Tone Zone (not a bad pick up AT all) I feel that it is a bit lacking in the aggressiveness for my...

I've been having problems with my Hamer for awhile. It started with the jiggling the jack to get sound back and it has gotten worse and worse. I re-wired it and replaced all components (below) and it worked for awhile and then cut out again. Now, I have no sound at all coming out of the...

When I move my pick up ground wire it sounds either extremely weak or full strength. Move it around, press on it, it might sound fine. Move it again, its weak. Here is what I've tried. Replaced both bots with multiple sets. I thought it was the pot (Both volume and tone) I replaced the...

Hey guys. I understand how to wire a jack with the ground and hot. On my Hamer, the long flat part of the jack that sticks out (I believe its part of the ground) was smashed to the volume pot and soldered to it. Is there any reason to do this, provided you have the ground loop hooked up? I...

Great condition, has casters and will come with the P50E speakers. Local Chicago pick up only. $550 $550

Bought this about a month ago, decided I like my Friedman better. It is a great amp, in really good condition and newly tubed. I'll post pics tonight. $1650 paypal'd and shipped (Gift please) Thanks, Jeff

Does anyone have any idea where I can buy these in the U.S.? This guy won't ship here and I don't want to drill into my guitar if I can avoid it. The way the hole is it is the only one that will line up with my Hamer. (That's how they drilled em!) I have tried everywhere I can think of but...